Xerox 3050 Service Manual page 444

WARNING
The
Fuser
Heat
Roll may be hot.
CAUTIONS
STEP 12 5: Cover the Photoreceptor
Drum with a light shield in order to
STEP 12 8: Be careful when removing
the module. The module is heavy and is
difficult
to
handle. The module cannot
be placed on any surface without
supports under each end of the module
frame. The supports prevent the Fuser
Neat RON
and Photoreceptor Drum
from being damaged.
NOTE:
0
The Xerographlc Module may be
moved onto the Service Rails or
removed from the copler for service.
When removed,
the Module must be
placed
on
a flat clean surface
for
sewice
or
storage.
12. (Figure 8): Move
the Xerographic
Module onto the service rails.
(OR)
Move the Xerographic Module to a
clean, flat surface for service. Ensure to
place supports under each end of the
module
frame.
ONTO THE SERVICE RAILS
u
MODULE BY THE
HANDLES TO REMOVE
4/96
REP 9.1 13
4-64~
3050