Xerox 3050 Service Manual page 501

REP 10.5 Thermistor Assembly
PWB (RTI)
Parts List on PL 10.4
REMOVAL
1 . Warning: Disconnect the power cord.
2. Remove the Oil Dispense Assembly (REP
10.7).
3. Rotate the Control Console and remove
the Document Handler.
4.
Raise the Document Feed-in Shelf.
Allow the fuser to cool before removing
the thermistor assembly. The fuser roll
may be hot.
5. (Figure 1): Remove the Thermistor
Assembly PWB (RT1).
Replacement
Q lightly lubricate the fuser roll with
silicon oil
in
the area where the
thermistor comes i n contact with the
roll.
1. Adjust the Fuser Temperature (AD1 10.1).
A .
Figure 1 . Remove the Thermistor Assembly
3/93
3050
4-105
REP 10.5