Xerox 3050 Service Manual page 342

CQ 17
Skewed lmage Probable Cause Corrective Action
Document entered the document handler 1.
incorrectly aligned, or the cut sheet media
entered the feed rolls incorrectly aligned.
There is
static
on the platen or the platen
2.
is
damaged.
Document Idler Rollers are contaminated 3.
or damaged.
There is an obstruction in the document 4.
return path. More probable in the
multiple copy mode.
Registration Drive and or pinch rolls are 5.
contaminated or damaged.
6.
Media Feed Drive andlor pinch rolls are
contaminated or damaged.
The lead edge of the document or of the
7.
copy media i s damaged.
Ensure that the document and the copy
media are fed in straight.
Clean the Platen with Antistatic Cleaner.
Replace the Platen (PL 6.1) if it
is
damaged.
Check that the Lower Document Drive rolls
and Document Pinch Rolls (PL 5.2) are not
binding. Replace the rolls and bearings if
necessary.
Check the document return path.
Clean the Registration rolls (PL 8.2):
US0 and XLA: Formula A Cleaner and
water.
RX: General Purpose Cleaner
Replace the rolls if they are damaged.
Clean the rolls (PL 8.2):
USOandXlA: Formula A Cleaner and
water.
RX: General Purpose Cleaner
Replace the rolls if they are damaged.
Ensure that the lead edges of the
document and the copy media are straight
and are not damaged.
7/92
CQ 17 Skewed Image
,3-58 3050