Xerox 3050 Service Manual page 629

Q
STEP6A: Pour the developer material
7 . (Figure 9 ) : Reinstall the Sump Shield on
evenly over the full length of the the bottom of the Developer Module.
augers.
I
6. (Figure 8): Install the Developer
Material and record the batch number
on the machine log.
INSTALL THE D E V E L O P E ~
MATERIAL
Figure
8.
Install the Developer Material
-
INSTALL THE SUMP SHlELl
I
LEDGE
Figure 9. Reinstall the Sump Shield on the bottom of the Developer Module
(Continued)
3/93
3050 6-27
Installation