Status Code List - Xerox XC23 User Manual

Status code Problem and suggested solutions
A1-A3 Document misfeed in the ADF/DADF, refer to the appropriate A1-A3 status code
procedure in the section entitled Clearing the status codes .
A5 The ADF/DADF cover is open. Close the cover.
A6 Remove originals from the ADF/DADF. Reorder and reload the originals and press the
Start button.
A8 The ADF/DADF original catch tray is in the raised position. Lower the original catch
tray.
C1-C4 Paper misfeed, refer to the C1-C4 status code procedure in the section entitled
Clearing the status codes . If the status code remains perform the E1-E3 status code
procedure.
C8 Paper misfeed, refer to the C8 status code procedure in the section entitled Clearing
the status codes . If the status code remains perform the E1-E3 status code procedure.
C9 Paper misfeed in the bypass tray, refer to the C9 status code procedure in the section
entitled Clearing the status codes .
E1-E3 There is a paper misfeed inside the copier or in the paper exit area, refer to the E1-E3
status code procedure in the section entitled Clearing the status codes .
E5 The copier front cover is open. Close the cover.
E6 The copier right upper or right lower cover is open. Close the cover.
F1 Remove the misfed sheet in the sorter, refer to the F1 status code procedure in the
section entitled Clearing the status codes.
F5 The sorter is unlatched to the copier or the sorter stapler cover is open. Latch the
sorter and/or close the sorter stapler cover.


F9


XC23/XC33/XC33D User Guide

Status code list

An excessive number of sheets to staple by the 10-bin sorter stapler, remove the
sets of copies. Reduce the number of sheets and try again.
The stapler is not correctly set in position. Open the sorter front cover and reset
the stapler, refer to the F9 status code procedure in the section entitled Clearing
the status codes .
The status code list provides you with a list of all the copier status
codes, identifies the problem, and provides suggested solutions
for the code.
Follow the suggested solutions until the problem is corrected. If
the problem persist, call the following number for assistance.
In the United States and Canada:
1-800-TEAM-XRX (1-800-832-6979).
Problem solving
87