Xerox 3050 Service Manual page 641

(Continued)
I
27. Apply zinc staerate t o the cleaner blade.
To prevent contaminating the Charge
CorotronlErase Lamp with zinc stearate,
0
STEPS 28A AND B: Reinstall the left
remove the Charge CorotronlErase
side of the drum assembly first to avoid
Lamp before applying the zinc stearate
damaging the drum ground bracket.
to the cleaner blade.
Reinstall the Charge CorotronlErase
28.
(Figure
25):
Reinstall the Photoreceptor
Lamp after applying the zinc stearate to
Drum Assembly.
the cleaner blade.
A
INSTALL THE PHOTORECEPTOR
DRUM ASSEMBLY WHILE
TO THE END
VIEW OF RIGHT SIDE
MOVE
THE BEARING
TO THE END
Figure 25. Reinstall the Photoreceptor Assembly
3/93
3050 6-39
Installation