Xerox 3050 Service Manual page 556

A
tag number within a circle and pointing to an item number A tag number within
a
circle having a shaded bar and pointing to A tag number within a circle with no apex shows that the entire
shows that the part has been changed by the tag number within
an item number shows that the configuration of the part shown is drawing has been changed by the tag number within the circle
the circle (Figure
4).
Information on the modification is in the
the configuration before the part was changed by the tag number (Figure 6). information on the modification is in the Change Tag
Change Tag Index. within the circle (Figure
5).
Index.
Figure 4. With Tag Symbol
Figure 6. Entire Drawing With Tag Symbol
A tag number within a circle with no apex and having a shaded
bar shows that the entire drawing was the configuralion before
being changed by the tag number within the circle (Figure
7).
Figure 5. Without Tag Symbol
Figure
7.
Entire Drawing Without Tag Symbol
PARTS LIST SECTION
INTRODUCTION