Call Back; Final Action - Xerox 3050 Service Manual

Final Action
I
1. Follow the Call Flow Diagram and
resolve the problem that caused the
Call Back.
I
2. Perform the Final Action, do not
perform the Maintenance Procedures.
Make a record of the copy count meter
i n the service log.
Make one
D (Al)
size copy on 20 Ib (80
gsm) bond paper of Test Pattern
8215980 in the Copy Contrast Normal
mode (the middle Copy Contrast lamp
is lit).
Evaluate the copy and ensure that
the copy meets the lmage Quality
Specifications as specified in the
lmage Quality Specifications area
of Section 3.
If the copy is not to specification,
refer to the appropriate Copy
Quality (CQ) defect and follow the
procedure to eliminate any defects.
Evaluate the copy for any visible
defects.
If the copy exhibits any visible
defects, refer to the appropriate
Copy Quality (CQ) defect and
follow the procedure to eliminate
the defects.
Make a copy with cut sheet media,
using the
Cut
Sheet feature.
Check that the copy count meter has
advanced.
Refer to Figures 1 and
2
and fill out the
Service Call Report. Record all activities
in the service log.
If new developer material was
installed, write the developer batch
number in the Service Log.
Give appropriate copy credits to the
customer.
Call Back1 Final Action