Xerox 3050 Service Manual page 619

(Continued)
5. Reinstall the terminal to the pin position it
was removed from.
4. (Figure 4): Reform the Terminal Locking 6. Reinstall the individual module connectors
Tab. to the correct locations noted at the
beginning of this procedure. Refer to
section 7 for detail of connector '
configuration
THE TERMINAL IS PARALLEL
WITH THE LINE ON THE TOOL
A
INSERT THE LOCKING TAB
O N THE TERMINAL OVER
THE HOOK O N THE
EXTRACTOR TOOL
Figure
4.
Reform the Terminal Locking Tab
10192
3050 6-1 7
Molex Connector Repair Procedure