Xerox 3050 Service Manual page 633

(Continued)
(9
Adjust the side which is the farthest out
'
of level first.
0 STEP 13 A : The bubble must be
centered between the lines on the level.
13. (Figure 14): Adjust the front-to-back level.
TO ADJUST THE A ON THE OTHER
LEVLE OF THE END OF THE
COPIER COPIER
\
Figure 14. Adjust the front-to-back level
0 S E P 14 6 : The bubble must be centered
between the lines on the level.
14. (Figure 15): Adjust the side-to-side level.
15. Perform steps 1 1 through 14 until the level
is within specification.
EQUALLY TO ADJUST
THE LEVEL OF THE
COPIER WHILE DOING
THE STEP B
Figure
15.
Adjust the side-to-side level
(Continued)
Installation