Table of Contents
Advertisement
Replacement
Do not remove the light shield until
Step 2 when the photoreceptor is
ready
to
be installed in the
xerographic module.
Q
STEP 1 A: Ensure that the top of the
drum box is up before opening the
box.
STEP 1 0: Ensure that the Drum End
Ple
ter
(2) are seated into the Drum
fully.
1. (Figure 2): install the Photoreceptor
Assembly Shaft.
2. (Figure 3): Prepare
the
Drum
for
installation.
(Continued)
INSTALL THE
END PLATE
AND SECURE
I
Flgure 2. Inrtallalon of the Assembly Shaft
REMOVE LIGHT
SHIELD
s
REMOVE (2) ONE
EACH SIDE
COVER THE
DRUM WITH
BLACK PLASTIC
C
I
REFER TO SECTION
6,
PHOTORECEPTOR DRUM
MAINTENANCE AND PERFORM
THE PHOTORECEPTOR
CLEANING ENHANCEMENT
I
Figure 3. Prepare the Drum for lnstallatlon
4/96
3060
4 - ~ O C
REP 9.3 B
Hide quick links:
Advertisement
Chapters
Table of Contents
