Xerox 3050 Service Manual page 335

CQ 14 Registration
Probable Cause Corrective Action
1. Registration is not adjusted correctly.
1.
2. Document sensor is incorrect or defective. 2.
3. Operator did not insert the document 3.
correctly or interfered with the movement
of the document.
4.
There is a build-up of static electricity on
4.
the platen, the document feed-in shelf
and1 or the upper rear door.
Perform the Image Registration (ADJ 8.1).
Ensure that the front document sensor is
installed correctly so that the actuator
actuates
0.040
inch (1 mm) above the
maximum height of the document drive
roils.
Instruct the operator on how to insert the
document into the document handler.
Clean the platen, the document feed-in
shelf and the upper rear door with
Antistatic Cleaner.
8194
3050
3-51
CQ
14 Registration