Creating Screenshots - Siemens SINUMERIK 840D sl Operating Manual

Searching for a logbook entry
You have the option for searching for specific entries using the search function.
Additional search option
13.8

Creating screenshots

You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1. The "Machine logbook" window is opened.
2. Press the "Search..." softkey and enter the desired term in the search
form. You can make a search according to date/time, company
name/department or according to fault diagnostics/measure.
The cursor is positioned on the first entry that corresponds to the search
term.
3. Press the "Continue search" softkey if the entry found is not the one that
you are looking for.
Press the "Go to Beginning" softkey to start the search at the latest
entry.
Press the "Go to End" softkey to start the search at the oldest entry.
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system run in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999". You can create up to 9,999
screenshots.
Alarm, error, and system messages
13.8 Creating screenshots
643