BHT-1200 Series
2.6 Resetting and Full Resetting
2.6.1 Reset
Reset the BHT in the following cases.
• The BHT does not respond to an entry from the touch screen or keys.
• Programs in the BHT malfunction for some unknown reason.
2.6.2 Reset Method
With the BHT power ON, press the reset key combination (BKSP + Right Trigger + Power) at
the same time. Then release all the keys.
− Point −
Data stored in files will not be lost by resetting. However, unsaved data currently
being edited will be lost.
2.6.3 Full Reset
Full reset is required if the problem persists even after resetting.
2.6.4 Full Reset Method
With the BHT power ON, press the full reset key combination
(BKSP + ENT + Left Trigger + Power) for more than 1 sec.
Then release all keys.
− Point −
All data including files and settings stored in the RAM will be lost and the RAM will
revert to the factory default when performing full reset. Back up any important data to
the "Flash" folder or to the computer before full reset. The BHT starts from the "Initial
Setup" when the BHT turns ON after the data in the RAM is deleted.
24