Subscribe to Our Youtube Channel
Related Manuals for Denso BHT-1400-CE Series
Summary of Contents for Denso BHT-1400-CE Series
- Page 1 Barcode/2D code Handy Terminal Barcode/2D code Handy Terminal BHT-1400-CE Series BHT-1400BWB-CE BHT-1400QWB-CE Windows Embedded Compact 7 model (WEC7) Hardware User's Manual User’s Manual User’s Manual...
- Page 2 3) The modification of DENSO WAVE's products by parties other than DENSO WAVE. • If it is determined by DENSO WAVE INCORPORATED that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the...
- Page 3 Barcode/2D Code Handy Terminal Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges. •...
- Page 4 The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent. • Every reasonable effort has been taken to ensure that the information contained in this manual is complete and accurate; however, should you notice any questionable points, errors or omissions, please contact DENSO WAVE. •...
- Page 5 Barcode/2D Code Handy Terminal Related Documentations • User’s Manual (Software) • BHT API Reference Manual • BHT Class Library Reference Manual • Bluetooth Library Reference Manual • kbifCE User’s Guide • SQRC Setting User’s Guide • Remote Desktop Plug-in Reference Manual...
- Page 6 BHT-1400-CE Series SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Read through this manual carefully to use the BHT and CU safely and correctly. Always keep this manual nearby for easy reference. The symbols used in this manual The symbols used in this manual are used to explain safe and correct use of the product so as to prevent bodily injury and property damage to you and others.
- Page 7 Barcode/2D Code Handy Terminal Handling the battery Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion. • Do not disassemble or modify the battery. • Do not connect the battery (+) and (-) terminals with a metal object such as a wire. •...
- Page 8 • Do not use the BHT if the case is damaged. • Do not use the power supply other than the battery specified by DENSO WAVE. • If the liquid leaks out from the broken LCD, do not swallow, inhale or touch it.
- Page 9 Barcode/2D Code Handy Terminal Handling the battery Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion. • If smoke, abnormal odor, noises, or anything unusual is noticed, stop using the battery immediately. •Do not put the battery into a microwave oven or high-pressure container.
- Page 10 BHT-1461QWB-CE are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Б ъ л г а р с к и : С настоящето DENSO WAVE INCORPORATED декларира, че устройствата BHT-1461BWB-CE и BHT-1461QWB-CE съответстват на съществените изисквания и другите приложими...
- Page 11 BHT-1461QWB-CE uppfyller de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktivet 1999/5/EG. Ελληνικά: Με το παρόν, η DENSO WAVE INCORPORATED, δηλώνει ότι οι συσκευές BHT-1461BWB-CE και BHT-1461QWB-CE πληρούν τις βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της Οδηγίας 1999/5/ΕK.
-
Page 12: Table Of Contents
BHT-1400-CE Series Chapter 1 Outline This chapter describes the BHT system and provides an overall outline of the BHT. System Configuration ···································································· 2 1.1.1 Hardware Configuration······································································ 2 1.1.2 Software Configuration ······································································· 3 Components and Functions ···························································· 4 1.2.1 BHT Front/Back ················································································ 4 1.2.2... -
Page 13: System Configuration
BHT-1400-CE Series 1.1 System Configuration This section describes the hardware and software required for the code data collection system using the BHT. 1.1.1 Hardware Configuration The following figure shows the required hardware for the BHT barcode data collection system. The required hardware varies depending on the communication method used. -
Page 14: Software Configuration
Barcode/2D Code Handy Terminal 1.1.2 Software Configuration [1] BHT Operating System (OS) Microsoft Windows Embedded Compact 7 [2] Application Program Development Environment Refer to "BHT API Reference Manual" and "BHT Class Library Reference Manual”. -
Page 15: Components And Functions
BHT-1400-CE Series 1.2 Components and Functions 1.2.1 BHT Front/Back ① ⑥ ② ⑬ ⑦ ③ ⑤ ⑪ ⑨ ⑩ ⑧ ④ ⑫ Name Function and Description Displays characters and graphic patterns. Touch panel LCD ① The buttons and menus can be selected by tapping the screen with the stylus. -
Page 16: Keypad
Barcode/2D Code Handy Terminal 1.2.2 Keypad The key assignments are changeable with user programs. The figure below shows an example of key assignments. ① ⑤ ④ ③ ② ⑧ ⑦ ⑩ ⑥ ⑪～⑭ ⑨ Name Function and Description Moves a cursor, selects menus or functions. Cursor key Magic key [M1] •... - Page 17 BHT-1400-CE Series Deletes the last entered character (backspace). When pressed and held for 1 second or more, cancels entry and returns the LCD display to the previous screen Backspace/clear key (clear.) Enter key Enters data or execute operations. Power key Turns the BHT power ON and OFF.
-
Page 18: Screen Image
Barcode/2D Code Handy Terminal 1.2.3 Screen image All screens in this User’s Manual are simulated. Actual screens may differ depending on user settings and other factors. Note: Taskbar may also differ from the actual screens. Taskbar icons The following icons are displayed in the taskbar to show the program status, operation modes and notifications. - Page 19 BHT-1400-CE Series Shows the software keyboard status. (Tap the icon to switch the software keyboard between “show” or “hide”, or to change the activation status.) : Shows that the software keyboard is activated. : Shows that the software keyboard is deactivated.
- Page 20 BHT-1400-CE Series Chapter 2 BHT Preparation This chapter describes inserting and charging the battery cartridge, turning the BHT power ON and OFF, and use of the hand strap. Preparation ················································································ 10 Charging the Battery ···································································· 10 2.2.1 Battery Power Level Indicator ···························································· 15 2.2.2...
-
Page 21: Preparation
High-temperatures may activate the charger protection device to stop charging, or lead to protection device damage, overheating, explosion or fire. ● Stop charging if the charge does not complete after the specified time has elapsed. ● Use only the dedicated battery specified by DENSO WAVE. - Page 22 Barcode / 2D Code Handy Terminal Charging with the communication unit (CU-AU1-14) ② Slide the battery cover lock (1) in the direction shown by the arrow and remove the battery cover (2). ① Insert the battery in the direction shown by the arrow, matching the positive and negative markings on the battery with the markings in the battery compartment.
- Page 23 BHT-1400-CE Series Connect the dedicated AC adapter to the CU (power inlet connector) and wall socket. The CU-AU1-14 does not charge the battery while the host computer is suspended − Note − if powered via a USB. The CU starts charging again when resuming from the suspend mode.
- Page 24 Barcode / 2D Code Handy Terminal The LED indicator changes to green when charging is complete. The LED illuminates in green Green LED ON when charging completes. Charging takes approximately 3 hours. − Notes − Charging takes approximately 12 hours If the power is supplied via the CU-AU1-14 from the ...
- Page 25 BHT-1400-CE Series Failure to follow all instructions listed below may result in charger overheating, smoking, explosion or fire. ● Never disassemble or modify the battery. ● Never connect the battery terminals with a metal object such as wire. ● Never carry or store the battery together with metal object such as necklaces or hairpins.
-
Page 26: Battery Power Level Indicator
Barcode / 2D Code Handy Terminal 2.2.1 Battery Power Level Indicator The battery power level can be checked with the icon (battery power level indicator) shown in the taskbar. The icon shows the battery power in four levels. These levels are only a rough estimate of battery power, make sure to charge the battery before running out of power. -
Page 27: Attaching The Hand Strap
BHT-1400-CE Series 2.3 Attaching the Hand Strap Attach the hand strap to prevent the BHT from being accidentally dropped during use. 2.3.1 Attaching the Hand Strap Attach the hand strap as shown below. 2.3.2 Holding the BHT Insert your hand into the hand belt and hold the BHT as shown below. -
Page 28: How To Use The Touch Screen
Barcode / 2D Code Handy Terminal 2.3.4 How to use the touch screen Select the buttons and menus shown on the LCD touch screen with the stylus provided. Action Description Flick Means swiping the touch screen quickly. Used to scroll the screen quickly. Means tapping the touch screen once. -
Page 29: Initial Setup
BHT-1400-CE Series 2.4 Initial Setup Press the power key to turn ON the BHT. When turning ON the BHT for the first time or after a long period of time, perform a “full reset” at first if the dialog box is not displayed. -
Page 30: Turning Off The Power
Barcode / 2D Code Handy Terminal 2.5 Turning OFF the Power Use one of the following three methods to turn OFF the BHT. Normal power OFF → Press the power key. Turning the power OFF after registry backup → Hold down the SF key and press the power key for 3 seconds or more. -
Page 31: Reset And Full Reset
BHT-1400-CE Series 2.6 Reset and Full Reset 2.6.1 Reset Reset the BHT when: - The BHT does not respond to any entry from the touch screen or keys. - Programs in the BHT malfunction for some unknown reason. 2.6.2 Reset Method With the BHT power ON, press the reset key combination (M1 + Right Trigger + Power) at the same time. -
Page 32: Memory Contents After Reset/Full Reset
Barcode / 2D Code Handy Terminal 2.6.5 Memory Contents after Reset/Full Reset Reset Full Reset Data in the “FLASH” folder Data retained Data retained (on-board FLASH memory) Data in the "Storage Card" folder Data retained Data retained (SD Card) Data in other folders Data retained Data erased (Note) -
Page 33: Inserting And Removing The Microsd Card
BHT-1400-CE Series 2.7 Inserting and Removing the microSD Card How to insert the microSD card Insert the microSD (option) card in the following procedure. Remove the battery. Slide the microSD card into the microSD card slot (1) in the direction shown by the arrow (2). - Page 34 Barcode / 2D Code Handy Terminal How to remove the microSD card Remove the microSD card from the BHT using the following procedure. Remove the battery as shown on the right. ② ③ ① Push the SD card until it clicks (2) while pressing down the stopper (1).
- Page 35 BHT-1400-CE Series...
- Page 36 BHT-1400-CE Series Chapter 3 Basic Operation This chapter describes basic operations such as barcode scanning, numerical data entry and item selection using the BHT, basic changes to settings, and BHT data transmission. Reading Barcodes or 2D Codes ····················································· 28 Turning ON/OFF the Backlight ······················································· 31 Using the Keypad ········································································...
-
Page 37: Reading Barcodes Or 2D Codes
BHT-1400-CE Series 3.1 Reading Barcodes or 2D Codes Follow the procedure below to scan codes. Turn the BHT power ON. Power key Press the trigger key or the SCAN key. The BHT emits an illumination light. Illumination light Illumination light BHT-1461QWB–CE... - Page 38 Barcode/2D Code Handy Terminal Clean dirty labels before reading. − Notes − The BHT may have difficulty reading codes in direct sunlight. If the code is on a curved surface, read the barcode at the center of the illumination light. ...
- Page 39 BHT-1400-CE Series When unable to successfully read codes… Cause Countermeasure Change the BHT reading angle and try again. The BHT may not read a code due to Specular specular reflection when the reflection illumination light is pointed vertically at a code on the printed surface.
-
Page 40: Turning On/Off The Backlight
Barcode/2D Code Handy Terminal 3.2 Turning ON/OFF the Backlight To turn the backlight ON or OFF, hold down the SF key and press the Right trigger key. Hold down the SF key and press the right trigger Key. Backlight OFF or dim (backlight function enabled) If no key is Press any key or tap... -
Page 41: Using The Keypad
BHT-1400-CE Series 3.3 Using the Keypad 3.3.1 Entering Numerical Data The default entry mode is numeric, enabling numbers written on the top of numeric keys to be entered. To enter “120” for example, press the “1”, “2” and “0” keys sequentially. -
Page 42: Transmitting Data
Barcode/2D Code Handy Terminal 3.4 Transmitting Data ® USB, RS232C, Ethernet, Bluetooth or wireless communication* can be used to transmit data collected by the BHT to the host computer. The data transmission method and BHT setting method varies depending on the system used, contact the system administrator for operation details Upload the data collected by the BHT to the host computer as soon as possible. -
Page 43: Usb/Rs232C Communication
BHT-1400-CE Series 3.4.1 USB/RS232C Communication The CU-AU1-14 and CU-AR1-14 connect to the host computer via USB or RS232C connection. Place the BHT in the CU to transmit data. USB/RS232C communication Host Computer CU-AU1-14 / CU-AR1-14 3.4.2 Ethernet Communication The CU-AL1-14 connects to the host computer via Ethernet. - Page 44 Barcode/2D Code Handy Terminal ® 3.4.3 Bluetooth Communication ® The Bluetooth interface permits wireless communications with other Bluetooth enabled devices. ® Bluetooth communication ® Bluetooth -enabled devices The BHT supports the following profiles: - Generic Access - Serial-DevA - Serial-DevB - Service Discovery - FTP - OPP...
- Page 45 BHT-1400-CE Series 3.4.4 Wireless Communication Wireless communication to the host computer via the wireless LAN access point. A wireless local area network between the BHT and wireless LAN access point is required to communicate with the wireless LAN access point.
- Page 46 BHT-1400-CE Series Chapter 4 Communication This chapter describes technical information relating to the infrared communication, wireless communication, and Bluetooth® communication functions with which the BHT is equipped. ® Bluetooth Communication ···························································· 38 ® 4.1.1 Notes for Bluetooth communication ··················································· 38 Wireless Communication ······························································...
-
Page 47: Bluetooth Communication
BHT-1400-CE Series ® 4.1 Bluetooth Communication ® The BHT has a built-in Bluetooth wireless module. ® 4.1.1 Notes for Bluetooth communication • The 2.4 GHz band used in the BHT travels in a straight line and has a trouble passing through human ®... -
Page 48: Wireless Communication
Barcode/2D Code Handy Terminal 4.2 Wireless Communication The BHT has a wireless module using the 2.4 GHz and 5GHz bands. 4.2.1 Notes for Wireless Communication • The 2.4 GHz band used in the BHT travels in a straight line and has a trouble passing through human bodies and other objects. -
Page 49: Activesync/Windows Mobile Device Center
BHT-1400-CE Series ActiveSync/Windows Mobile Device Center ActiveSync/Windows Mobile Device Center (WMDC) enables the following features by connecting the BHT to the host computer using the CU-AU1-14 via USB. • Synchronize data • Backup data • Copy or move data • Debug user programs Download the software for the host computer operating system from the Microsoft web site. - Page 50 BHT-1400-CE Series Chapter 5 Maintenance This chapter describes battery cartridge and daily procedures for taking care of the BHT and CU. Replacing the Battery ··································································· 42 5.1.1 Battery Service Life ········································································· 42 5.1.2 Battery Cartridge Replacement Method ··············································· 42 Replacing the Backup Battery ························································ 44 Using the BHT after Long Periods ···················································...
-
Page 51: Replacing The Battery
Refer to “Chapter 2 BHT Preparation” – “2.2 Charging the Battery”. Do not use battery other than that specified by DENSO WAVE. − Point −... - Page 52 Barcode/2D Code Handy Terminal Insert the catch tab into the fit position (1) then replace the cover (2), and then slide shut the cover lock (3). ① ② ③ Battery Recycling Request ● This product uses a lithium-ion battery that contains recyclable rare earth metals. Please recycle the battery correctly to promote sustainable reuse of these resources.
-
Page 53: Replacing The Backup Battery
BHT-1400-CE Series 5.2 Replacing the Backup Battery Contact your dealer to replace the backup battery if the following warning message is displayed. This warning message is displayed each time the power turns ON after the backup battery has fully discharged 200 times or more. -
Page 54: Using The Bht After Long Periods
Barcode/2D Code Handy Terminal 5.3 Using the BHT after Long Periods Data including files and settings stored in the RAM may be lost and the calendar clock may stop if the BHT is left unused for long periods of time. The RAM will restore to the factory default. -
Page 55: Daily Maintenance
BHT-1400-CE Series 5.4 Daily Maintenance 5.4.1 Proper Care of the BHT Wipe any dirt from the BHT housing, charge terminals, and BHT or battery terminals with a dry, soft cloth. Be sure to turn OFF the BHT before cleaning. Never use substances such as benzene or alcohol, as this may cause the housing to be marred or −... - Page 56 BHT-1400-CE Series Chapter 6 Specifications This chapter describes the BHT-1400-CE Series specifications. BHT-1400-CE Series Specifications ················································ 48 6.1.1 Hardware Specifications ··································································· 48 6.1.2 Code Specifications ········································································· 49 6.1.3 Scanning Performance and Reading Area ··········································· 53 6.1.4 Interface Specifications ···································································· 57...
-
Page 57: Bht-1400-Ce Series Specifications
BHT-1400-CE Series 6.1 BHT-1400-CE Series Specifications 6.1.1 Hardware Specifications Power supply (main power): Rechargeable lithium-ion battery cartridge (3.7 V DC) Dimensions (W) x (L) x (H): 62×180×48 mm（BHT-1400QWB-CE） 62×180×44 mm（BHT-1400BWB-CE） Weight: Approx. 255 g Ambient operating temperature: -20 to 50° C (0 to 40° C during charging) -
Page 58: Code Specifications
Barcode / 2D Code Handy 6.1.2 Code Specifications Supported Code Types BHT-1400QWB-CE Series The values given here are defined at the scanning reference position. Refer to “6.1.3 Scanning Performance and Field of View” for details. QR code (Model 1, Model 2) and Micro QR code Code size Cell pitch QR code... - Page 59 BHT-1400-CE Series Barcode Scan Magnifications or digit Supported Barcode Type Bar Dimension numbers Universal product codes EAN-13 0.26 to 0.50 mm 0.8 to 1.5 times EAN-8 0.26 to 0.66 mm 0.8 to 2.0 times UPC-A with add-on (17 digits) 0.26 to 0.36 mm 0.8 to 1.0 times...
- Page 60 Barcode / 2D Code Handy BHT-1400BWB-CE Series Barcode Scan Magnifications Supported Barcode Type Bar Dimension or digit numbers Universal product codes JAN-13 (EAN-13) JAN-8 (EAN-8) UPC-A UPC-E 0.26 mm min. 0.8 or more JAN-13 (EAN-13) with add-on JAN-8 (EAN-8) with add-on UPC-A with add-on UPC-E with add-on 2 digits add-on...
- Page 61 BHT-1400-CE Series Multiline code reading The BHT-1400Q series models support multiline code reading. A maximum of three lines of barcodes in the readable area can be read all at once. Multiline code reading is settable only with application programs. Refer to “BHT API reference manual” and “BHT Class Library reference manual”.
-
Page 62: Scanning Performance And Reading Area
Barcode / 2D Code Handy 6.1.3 Scanning Performance and Reading Area BHT-1400QWB-CE Series Scanning Reference Position Point the reading window at the center of the label (code) as shown on the left. Label Read distance and area Scanning reference position (100 mm) 0.25 mm 0.33 mm 0.5 mm... - Page 63 BHT-1400-CE Series QR code cell pitch dimensions Readable distance 0.25 mm 45 to 145 mm *1 0.33 mm 60 to 205 mm *2 0.50 mm 70 to 275 mm *3 PCS value: 0.9 min., White reflection intensity: 85% min Under the following conditions:...
- Page 64 Barcode / 2D Code Handy BHT-1400BWB-CE Series Scanning Reference Position Point the reading window at the center of the Label label (code) as shown on the left. Read distance and area 600mm 180mm Central scanning axis 0.12mm 0.15mm 0.33mm 1.0mm 50 100 900mm Read distance...
- Page 65 BHT-1400-CE Series Under the following conditions: Under the following conditions: Ambient brightness: 500 Lx. (xenon light source) Ambient brightness: 500 Lx. (xenon light source) Code 39: 19 digits, Narrow/wide bar ratio = 1:2.2 Code 39: 15 digits, Narrow/wide bar ratio = 1:2.2 White bar reflectance intensity: 85% min.
-
Page 66: Interface Specifications
Barcode / 2D Code Handy 6.1.4 Interface Specifications USB Interface Communication method: USB OTG 2.0, Full-speed compliant ® Bluetooth Interface ® Specification: Bluetooth Ver. 2.1 + EDR compliant RF output: Class 2 (2.5 mW max.) Supported profiles: - Generic Access - Serial-DevA - Serial-DevB - Service Discovery... - Page 67 BHT-1400-CE Series...
- Page 68 BHT-1400-CE Series Appendix This chapter describes the CU (option) specifications. Appendix CU Specifications ································································· 60 (1) Hardware Specifications ········································································· 60 (2) Charging Requirements (CU-AR1-14 / CU-AL1-14 / CU-AU1-14) ··················· 60...
- Page 69 BHT-1400-CE Series Appendix CU Specifications (1) Hardware Specifications CU-AR1-14 CU-AL1-14 CU-AU1-14 AC100V Power supply AC100V AC100V (Dedicated AC adapter) (Dedicated AC adapter) (Dedicated AC adapter) Powered USB Maximum power consumption 5V，1.5A 5V，1.5A 5V 500mA Dimensions (W) x (L) x (H) 95×110×109 mm...
- Page 70 Barcode / 2D Code Handy Terminal CU-AL1-14 The CU- AL1-14 has an IEEE802.3-compliant Ethernet interface port (100Base-TX). CU-AL1-14 Ethernet interface port (RJ45 jack） Pin No. Signal Function Send data Send data Receive data N.C. No connection N.C. No connection Receive data N.C.
- Page 71 BHT-1400-CE Series...
- Page 72 Barcode/2D Code Handy Terminal BHT-1461QWB-CE BHT-1461BWB-CE User’s Manual First Edition October 2015...
Need help?
Do you have a question about the BHT-1400-CE Series and is the answer not in the manual?
Questions and answers