Denso BHT-1260BWB-CE User Manual page 11

To System Designers
In a life-critical system such as a medicines management system, even a simple data error may cause a

potential life-threatening situation. Always design a redundant fail-safe system to protect human lives.
Handling the BHT
Failure to follow all instructions listed below may cause electrical shock, overheating and smoking.
• Do not disassemble or modify the BHT.
• Do not insert foreign objects in the BHT.
• Do not wet the BHT with water or seawater.
• Do not put the BHT into a microwave oven or high-pressure container.
• Do not leave the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles or in places exposed to direct sunlight.
• Do not use or store the battery in places exceeding the service or storage temperature.
• Do not use the BHT with the damaged case.
• Do not use the power supply other than the battery specified by DENSO WAVE.
• Do not poke anyone's eyes with the stylus that comes with the BHT.
The 2D Code Handy Terminal uses a laser light for indicating the scanning range. The intensity of the
laser light is too low to inflict bodily injury. However, do not stare into beam.
You must observe the following precautions when handling the BHT equipped with laser light.
1) Never stare into the reading window.
2) Never point the reading window at someone's eye.
The 2D Code Handy Terminal complies with IEC 60825-1 Ed.2:2007.
In accordance with Clause 5 and 6, IEC 60825-1, the following information is provided to the user:
BHT-1261QWB
BHT-1261QWBG
Caution – Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous laser light exposure.
• If smoke, abnormal odor, noises, or anything unusual is noticed, immediately turn the BHT off and
remove the battery from the BHT.
• If the battery fluid leaks out from the battery and gets into your eyes, or comes into contact with the skin,
wash thoroughly with clean water such as tap water without rubbing, and seek medical attention
immediately. Failure to follow instruction may result in eye or skin injuries.
• Stop charging if the charge does not complete after the specified time has elapsed.
Barcode Handy Terminal/2D code Handy Terminal
Reading Window
(Laser Light emission window)
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
x