Denso BHT-1260BWB-CE User Manual page 202

BHT-1200 Series
Value List
Parameter
Common
Pwd
Taskbar
TenKey
TenKeyInterval
MenuFontName
MenuFontSizeHvga
MenuFontSizeQvga
MenuFontSizeH1_5
MenuFontSizeVga
Applications
Path | Name | Font
Path
Name
Font
AdminApplications
Parameters are the same as "Applications" in the user mode.
(*1) The apostrophe("") is used for applications that are not necessary to display (not run manually) or not allowed
to display, such as an ActiveSync/WMDC auto-execute application or CAB install application.
Example:
\windows\rnaapp.exe
\windows\wceload.exe
190
GUI screen
Application Launcher function settings
Password Enter the administrator password
Maximum 255 characters.
Default: ""(blank), No password
Taskbar Use this parameter to show or hide the taskbar.
0: Hide, 1: Show (Default)
Enable 10-key 0: Disabled (Default), 1: enabled
Keystroke time interval 1 to 5 seconds, Default: 2 seconds
Menu Font BHT font
Default:""(blank), Tahoma
HVGA 1 to 72pt.
A value exceeding maximum size is set to 72pt.
QVGA
H1.5
VGA
Application information allowed in the user mode.
'|': Separation character.
Enter "|" after each application path as a separation.
Name and font can be omitted.
Path Maximum 255 characters.
Enter full path of an application.
(ex.) "\path\app.exe"
Name Maximum 255 characters.
An application name entered can be selected from the
application list.
When the apostrophe ("") is entered, an application
will not be displayed in the application list and cannot
be selected from the list. (*1)
Font BHT font
When the check box is checked, an application name
is displayed in a selected font.
When unchecked, the font set in the "Settings" menu
is used to display an application name.
Application information allowed in the admin mode.
' ActiveSync / WMDC autoconnect
' Install CAB files
Value