Denso BHT-1260BWB-CE User Manual page 159

Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
[3] Serial Port service
To use the serial port service, double tap the "Serial Port" icon or select "Connect" in the contextual menu
shown by holding down the icon.
The COM port selection prompt dialog is displayed when the "Auto Client COM Port" is not checked in the
local device properties option tab page.
Refer to 4.6.4 Properties and configuration [3] Local device properties and
configuration - Option tab.
The first available COM port is automatically connected to the "Serial Port"
service, when the Auto Client COM Port is checked.
The message shown on the right is displayed when the connection is
successfully established.
The error message shown on the right is displayed when an error occurs.
The connection status of the service is shown as below.
Service is not connected Service is connected
When the "Serial Port" service is on, all applications can use the Bluetooth virtual COM port.
To check the COM port settings, select the "Properties" in the contextual menu shown by holding down
the "Serial Port" icon.
147