Using The Bht After Long Periods - Denso BHT-1260BWB-CE User Manual

6.4 Using the BHT after Long Periods

Data including files and settings stored in the RAM may be lost and the calendar clock may stop if the
BHT is left unused for long periods of time.
(The RAM will restore to the factory default. Any important data should be backed up to the "FLASH"
folder or to the computer. The BHT starts from the "Initial Setup" when the BHT turns ON after the
data in the RAM is deleted.)
Take appropriate measures by following the procedure below.
Does the power turn
ON?
Yes
Does the normal
screen display?
Yes
The BHT can be used.
Charge promptly
before the battery
runs out. (*)
− Point −
*: Files may become corrupted if left for a long period of time without charging
or replacing the battery.
Insert a fully charged battery.
No
* Do not remove the battery from the BHT for at least
2 days to charge the backup battery.
No
The normal screen
does not display.
The "Working" screen
Perform a "full reset".
Refer to Chapter 2, 2.4
Initial Setup or 2.6
Resetting and Full
Barcode Handy Terminal/2D code
Power
"No system!" screen is
displayed.
The "Working" screen is
The following reasons may be
considered. Contact the system
administrator.
• Hardware damage
• Application failure
211