Related Manuals for Denso BHT-1800 Series
Summary of Contents for Denso BHT-1800 Series
- Page 1 Barcode/2Dcode HandyTerminal BHT-1800QWB BHT-1800QWBG Hardware Userʼs Manual Hardware Userʼs Manual...
- Page 2 DENSO WAVE. The use of DENSO WAVE ’ s products in a manner for which they were not intended nor designed. The modification of DENSO WAVE ’ s products by parties other than DENSO WAVE.
-
Page 3: Customer Registration And Inquiries
BHT-1800 Series Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges. The latest upgrade information •... -
Page 4: Safety Precautions
Barcode / 2D Code Handy Terminal Safety Precautions Be sure to observe all these safety precautions. Please READ through this manual carefully. It will enable you to use the BHT and CU correctly. Always keep this manual nearby for speedy reference. Safety precautions description in this document Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury and substantial property damage. - Page 5 BHT-1800 Series DANGER Handling the batteries Wrong handling the batteries may result in electrical shock, overheating, smoke generation, combustion, blowout, or leakage of battery fluid. Please read the following items prior to use. • Never disassemble or modify the battery.
- Page 6 Barcode / 2D Code Handy Terminal WARNING To system designers • When introducing BHTs in those systems that could affect human lives, develop applications carefully through redundancy and safety design which avoids the feasibility of affecting human lives even if a data error occurs. Handling the BHT Wrong handling of the BHT may affect normal operation or result in, electric shock, generating heat and smoke, and vision disturbance.
- Page 7 BHT-1800 Series Handling the batteries Wrong handling the batteries may result in electrical shock, overheating, smoke generation, combustion, or blowout. Please read the following items prior to use. • The battery is exclusively for the BHT. Do not use the battery for purposes other than charging the BHT.
- Page 8 Barcode / 2D Code Handy Terminal CAUTION Handling the BHT Wrong handling of the BHT may affect normal operation or result in overheating, smoke generation, failure, and vision disturbance. Be sure to observe the following. When using the hand strap or neck strap, exercise due care to avoid getting them caught in •...
-
Page 9: About This Product
BHT-1800 Series About This Product The BHT-1800 handy terminal, powered by Android 7.1.2 Nougat, is light-weight, easy to use, providing powerful and handy tools for the purpose of delivering flexibility in customization. Specifically designed to work as an industrial PDA, it provides rich options for data collection, voice and data communication, long-lasting working hours, and so on. - Page 10 Barcode / 2D Code Handy Terminal 1 Quick Start Guide 1.1 Appearance...
- Page 11 BHT-1800 Series...
- Page 12 Barcode / 2D Code Handy Terminal Description of key Name Function of overview Denotes the code reading status or the charging Status indicator status with color or flashing state of light. Speaker Sound comes out of it. Receives speaker's voice when talking. This function Receiver is integrated in the WWAN model.
-
Page 13: Attaching The Hand Strap
BHT-1800 Series are equipped depending on the model. 1.2 Supporting Model List BHT-1800 series enables the option selection by model as shown in the table below. Receiver, WLAN, LTE, GPS microphone Bluetooth ® BHT-1800QWB-1 — — — ✓ BHT-1800QWB-2 —... -
Page 14: Installing Battery
Barcode / 2D Code Handy Terminal 1.4 Installing Battery The BHT main body and the main battery are packaged separately due to the conditions of shipment and storage. Caution: Incorrect handling may decrease the lifetime of battery. Warning: Before powering on, confirm that the battery cover lock is positioned at the “ Lock ” position. To use BHT for the first time, install a charged battery and lock the battery cover. - Page 15 BHT-1800 Series Step 4 Pay attention to the direction of the battery electrodes and install the battery. Step 5 Push the battery all the way in. Step 6 Insert the battery cover tab. Step 7 Close the battery cover . And slide...
- Page 16 Barcode / 2D Code Handy Terminal 1.5 Installing and Removing SIM Card/microSD Card BHT-1800 Handy Terminal is equipped with one microSD card slot. WWAN model is equipped with two SIM card slots as well. Installation of a card 1. Remove the battery cover as described in battery removal. 2.
- Page 17 BHT-1800 Series 1.6 Power ON/OFF BHT Power ON To power on BHT, press and hold the power button located on the upper right side of BHT. BHT will turn on and show the lock screen after splash screen. Swipe the lock screen upward to display the home screen.
-
Page 18: Using Hardware Buttons
Barcode / 2D Code Handy Terminal 1.7 Using Hardware Buttons On the bottom of BHT are three hardware buttons that deliver the following functions. Button Function Description Returns to the previous screen or closes the active Back button window or keyboard. Home button Displays the Home screen. -
Page 19: Charging Time
BHT-1800 Series 1.8 Charging The main battery may not be charged to full for shipment. When you first receive the kit package, you need to charge the main battery to full before using BHT. You may use the Communication Unit or multiple BHT charger to charge the BHT. - Page 20 Barcode / 2D Code Handy Terminal 1.8.4 Use of USB Direct Cable The USB Direct Cable provides a convenient way to charge your BHT. Fasten the USB Direct Cable to the lower end of the BHT. Connect the other end of the cable to the USB port or the USB power adapter of a host computer. It may take long to charge to full depending on the power supply capacity of the host computer.
- Page 21 BHT-1800 Series AC adaptor DC input plug As for CU-BU1-18, the BHT may be charged through the USB connector. It may take longer to charge than when using the AC adaptor. Do not charge a spare battery using the USB power supply.
- Page 22 Barcode / 2D Code Handy Terminal Charging procedure Charge your BHT using the Communication Unit as described below. Insert your BHT onto the Communication Unit. Press BHT down till you hear a ‘ click ’ to make sure it is secured in the charging station.
- Page 23 BHT-1800 Series Notice on the power source of the Communication Unit As for Communication Unit CU-BU1-18 with USB interface, be sure to unplug the USB connector first and then unplug the DC input connector when both DC input connector and USB connector are inserted.
- Page 24 Barcode / 2D Code Handy Terminal 1.9 Communication The barcode data collection system using BHT can connect various types of hardware to the BHT through each communication system.
-
Page 25: Ethernet Communication
BHT-1800 Series 1.9.1 USB Communication Communication between BHT and a host computer through the Communication Unit with USB interface or by directly connecting them using the USB direct cable to enable the data communication complying with USB2.0 standard. For the connection with the Communication Unit, refer to 1.8.5 Use of Communication Unit. - Page 26 Barcode / 2D Code Handy Terminal 1.9.6 MFC Communication Communication between BHT of NFC supporting model and NFC tag or NFC supporting device to enable data communication complying with Mifare, Felica standard. Near Field communications (NFC) uses close proximity (2 cm or less) to establish WLAN communication through electromagnetic fields.
- Page 27 BHT-1800 Series 2 Using BHT-1800 2.1 Battery Main Battery BHT is powered by BT-180LA, 3.85 V/2900 mAh rechargeable Li-ion battery pack. It takes approximately 4 hours at 18 ° to 35 ° C ambient temperature to charge them to full using the Communication Unit with AC adaptor or the charger.
- Page 28 Barcode / 2D Code Handy Terminal To check the exact remaining percentage of power and battery life: Swipe down from the top of the screen with two fingers to open QuickSettings. The percentage of remaining battery power is shown below the battery icon; you can tap on it to enter Battery Settings for more details and configurations.
- Page 29 BHT-1800 Series device has been running on battery power, and which applications are consuming the most battery power. To look at the timeline of each application that drained or has been draining the battery power, tap on the chart, which enables you to diagnose any serious power drains.
- Page 30 Barcode / 2D Code Handy Terminal Switch on the function and choose when to have this mode automatically activated. After enabling this function, the title bar of the screen will turn orange. The battery saver mode will automatically become inactive when BHT is being charged. Battery optimisation With Battery optimisation enabled for the applications, you can make sure they stay inactive when your BHT is idle or when applications have not been used for days.
- Page 31 BHT-1800 Series On the dropdown list, select “ All apps ” , and all the applications will be optimised by this function by default. You can individually turn off the optimisation mode of certain app. If you would like it always activated by tapping on the App.
- Page 32 Barcode / 2D Code Handy Terminal Open the battery cover and insert a charged battery as in Installing Battery. Press the power button to power on. Before replacing the main battery, make sure the backup battery is well-charged in order to avoid unnecessary data loss.
-
Page 33: Power Management
BHT-1800 Series 2.1.3 Power Management Here are some tips to help you save battery power. Caution: Using backlight, wireless connectivity, and peripheral devices while on battery power will substantially reduce battery power. Bring an additional main battery pack with you when you go out. -
Page 34: Touch Screen
When selecting an SD card for the best compatibility and performance with BHT-1800 series, please make sure of the capacity you need. For the use of SDXC card, please use a new card and make sure that it has not been used in other host devices (computers, cameras, or SD card readers). -
Page 35: Status Indicator
BHT-1800 Series 2.4 Notifications 2.4.1 Status Indicator Status indicator located above the touch screen provide information about charging status, scanner light beam, and scanner “ Good Read ” during data collection. Status Action Description indication Green, solid Charging complete Red, solid... -
Page 36: Legal Information
Barcode / 2D Code Handy Terminal 2.5 Cameras An 8-megapixel rear camera integrated in BHT and a 5-megapixel front camera integrated in only the specific models specified in 1.2 Supporting Model List are specially designed for collecting image data. You may use the Camera application to take images. By default, the images taken by this camera application are saved as JPG files in DCIM folder in the BHT's main storage. -
Page 37: Basic Operation
BHT-1800 Series 3 Basic Operation This chapter describes the basic skills to work with BHT-1800 handy terminal, for instance how to operate the home screen, check of system statuses and management notifications. The add-on utilities for applications regarding data reading, processing and transmission are introduced in the following chapters. -
Page 38: Keyboard Input
Barcode / 2D Code Handy Terminal 3.2 Keyboard Input When the text input field appears, the on-screen keyboard is opened automatically. The style of keyboard varies according to the data type (texts or numbers) this field requires. Data can also be input with the keyboard in the main body of BHT. -
Page 39: Data Transmission
BHT-1800 Series 3.3 Data Transmission Data collected by BHT can be transmitted to the host computer by USB communication, Ethernet communication, Bluetooth communication, WLAN communication and WWAN communication. ® Data transmission methods and setting methods vary according to the system our customer uses. -
Page 40: Resetting To The Factory Default
Barcode / 2D Code Handy Terminal By selecting a method, such as pattern, PIN or Password, you can access advanced settings to customise personal lock settings. To save battery power, suspend BHT when not in use. 3.5 Resetting to the Factory Default Resetting to a factory default will erase all data on your BHT including call logs, messages files as well as your installed apps and their associated data, and revert the BHT back to its original state in which you powered on for the first time. - Page 41 BHT-1800 Series 4 Specifications 4.1 Model/Platform/Processor/Memory BHT-1800 comes in six models as described below: WWAN model: BHT-1800QWBG-1, BHT-1800QWBG-2, BHT-1800QWBG-3 WLAN model: BHT-1800BWB-1, BHT-1800QWB-2, BHT-1800QWB-3 4.1.1 Operating system/CPU OS version Android™ ７.1.2 Nougat Qualcomm APQ8009 (WLAN model) Quad-core1.3 GHz ® Qualcomm MSM8909 (WWAN model) Quad-core1.3 GHz...
-
Page 42: Electrical Characteristics
Perform a sufficient reading test with a card to be used preliminarily. It is not recommended to read the IC driver ’ s license. (DENSO WAVE has already checked and evaluated that a part of driver ’ s licenses are not readable.) 4.3 Electrical Characteristics... -
Page 43: Physical Characteristics
BHT-1800 Series 4.4 Physical Characteristics 4.4.1 Color Touch Screen Display 5″ Transmissive IPS LCD, Dragontrail PRO Glass Display ® Resolution HD (720 X 1280 pixels) 4.4.2 Notifications Status indicator Lighting red when charging, green when charging is completed Lighting blue when reading is completed... - Page 44 Barcode / 2D Code Handy Terminal Appendix I Reading configuration Symbologies supported Codabar Code 11 Code 39 Code 39 Trioptic Code 39 Italian Pharmacode (Code 32) Code 93 Code 128 Code 128 GS1-128 (EAN-128) ISBT 128 Code 2 of 5 Chinese 25 Industrial 25 (Discrete 25) Interleaved 25...
- Page 45 BHT-1800 Series EAN/UPC EAN-8 EAN-8 Extend EAN-13 Bookland EAN (ISBN) ISSN EAN UPC-A UPC-E Convert to UPC-A UPC-E1 Convert to UPC-A 2D Symbologies Aztec Data Matrix Maxicode MacroPDF MicroPDF417 MicroQR PDF417 QR Code...
- Page 46 Handy Terminal BHT-1800 series Hardware User’s Manual Preview Edition August 2018...