Denso BHT-1260BWB-CE User Manual page 97

[5] Key
"Key" is used to set up how the keypad keys work.
To set the keypad key functions, double tap the "Key" icon in the System
Properties.
In the "General" tab, the Shift key, Function key and Power key functions can
be changed.
Shift key
Nonlock: The keypad stays in the SF mode while the SHIFT key is
held down. (Default)
Onetime: The keypad is in the SF mode only once each time the
SHIFT key is pressed.
Function key
Lock: The function keys are activated until the FN key is pressed again. (Default)
One Time Lock: The function keys are activated only once each time the FN key is pressed.
Power key
Sets how long the power key needs to be held down until the BHT goes into the suspend mode (wait
time). The wait time can be set from 1 to 600 (The unit is 100ms). The default is set to 5.
In the "Magic Keys" tab, the M1 to M4 key functions can be changed.
Magic keys
The magic keys M1 to M4 can be assigned to some functions from the
drop-down list.
Assignable functions for the Magic keys
The following key functions can be assigned to the magic keys M1 to M4
(TAB).
(The example on the right shows that the Tab key function is assigned to
the M1.)
None: No function is assigned. (The key entry will be ignored,
but the key code will be sent to the application.)
Trigger Switch: Sets a magic key as the trigger key.
Shift Key: Sets a magic key as the SHIFT key.
Enter Key: Sets a magic key as the ENT key.
Backlight Key: Sets a magic key as the backlight ON/OFF function key.
Tab Key: Sets a magic key as the TAB key.
Control: Sets a magic key as the CTRL key.
Alternate: Sets a magic key as the ALT key.
Clear: Sets a magic key as the Clear function key.
Disable: Disables the key entry. (No key code will be sent to the
application).
Launch APP key: Sets a magic key as the application launcher key.
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
85