Denso BHT-1260BWB-CE User Manual page 95

Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
[3] File System
"File System" is used to initialize the Flash memory, registry and RAM
memory.
To initialize, double tap the "File System" icon in the System Properties.
Select the memories to initialize, then tap the "Initialize" button.
The popup message shown on the right is displayed.
Tap "Yes" to start initialization.
Tap "No" to return to the previous menu.
The FLASH memory initialization does not require the BHT to reboot.
When the FLASH memory is only initialized, the popup message shown
on the right is displayed after the initialization is successfully completed.
Tap "OK" to close the popup message.
The registry and the RAM memory initializations require the BHT to
reboot.
When the registry or RAM is selected for initialization, the popup message
shown on the right is displayed for several seconds after the initialization
is successfully completed.
Then the BHT reboots automatically.
83