Denso BHT-1260BWB-CE User Manual page 109

[12] Startup Configuration
"Startup Config" is used to define how the BHT starts up after rest and
full-reset.
Refer to Chapter 2, 2.6.6 Reinstall/Recovery methods of data after
Reset/Full reset, and Chapter 7, 7.1 System Errors.
To set up, double tap the "Startup Config" icon in the System Properties.
General
(1) Automatic Restore
(2) Automatic Registry Restore
(3) Automatic File Copy
(4) Automatic Application Setup and Reboot
(5) Automatic Application Launch
(6) Automatic Application Launch
Restore Data:
Registry Only:
File & Registry:
The following functions are supported by File & Registry (BHT Backup).
Storage device:
Backup file:
Auto backup data:
Copy files from one folder to another: Selects whether to perform "Automatic File Copy"
"Flash\Copyfile" folder...:
"Flash\Startup\Windows" folder...:
 Note 
"Automatic File Copy" is not performed if no files exist in the above folder,
even if "Copy files..." is selected.
Setup Launcher: Selects whether to perform "Automatic Application Launch".
"Setup" folder...:
Reboot after Setup:
 Note 
"Automatic Application Setup and Reboot" is not performed if no files exist in
the above folder, even if "Setup Launcher" is selected.
Barcode Handy Terminal/2D code Handy Terminal
Restore Data - File & Registry
(BHT Backup)
Restore Data - Registry Only
Copy files from one folder to another
Setup Launcher
Startup Launcher - Flash "Startup" folder...:
Startup Launcher - Windows "Startup" folder...:
Selects whether to perform "Automatic Restore"
Restores only the registry saved in the registry (default)
Restores the files and registry from the BHT backup data
Storage location of backup file
Backup file name to be restored automatically
"Unselected" is displayed under the following conditions.
1) The backup file is not set.
2) The specified backup file does not exist.
Automatically backs up the specified data (registry or file/registry) at power-off. The
storage location cannot be specified.
Restore will be performed using the data backed up automatically.
Open the "Flash\Copyfile" folder with file explorer
Open the "Flash\Startup\Windows" folder with file explorer
Open the "\Flash\Setup" folder with file explorer
Selects whether to reset the system after the execution of program.
Hand Held Terminal
Barcode Handy Terminal
97