Denso BHT-1260BWB-CE User Manual page 124

BHT-1200 Series
NOTES: Command Prompt (CMD) specification
> OSUpdate /e [/r] [/f]
/e Execute command line mode
(none) Execute GUI mode (default)
/e Command line mode without the battery power check.
/eb Command line mode with the battery power check.
If the battery level is level-1 or less, the OS update is not performed.
The following parameters are valid when "/e" is specified.
/r Reboot mode
(none) The BHT immediately restarts after the OS update. (Restart now) (default)
/r The same as the above. (Restart now) (default)
/rp The BHT turns off after the OS update. (Power off)
/rl The BHT does not restart after the OS update. (Restart later).
After full-reset is performed, the updated OS takes effect.
/f folder/file Specify the OS image files or folder full path.
(none) The OS is updated with the OS image files which are in the folder that the OSupdate.exe deploys
/f Specify the full path that the OS image files deploy.
The full path must start with "\" for the local folder.
The full path must start with "\\" for the network folder.
Enclose the path in double quotation marks ("") when a blank character is included in the path.
/h, /? help
- Note -
- Both '/' and '-' can be used as an option delimiter.
- Both lower case and upper case characters are treated as the same character. (Both lower
case and upper case characters can be used.)
- OSUpdate.exe is provided with the OS image files, or can be copied from the windows folder.
Return values
0 Success
1
OS updating is skipped due to the existence of the same OS version
2 Failed
3 OS updating is canceled due to low battery power
4 Incorrect parameters
5 Error occurred before the OS update
6 Error occurred after the OS update
7 Error (Full-reset is required before the next OS update.)
9 Unable to update the OS.
Examples:
(Ex1) [Recommendation]
Update the OS with the OS image files that are in the folder that the OSupdate.exe deploys.
>\\Flash\OSUpdate.exe /e
(Ex2) Update the OS with the OS image files in the server folder.
The battery power check is enabled (/eb). (File name is an example.)
>OSUpdate.exe /eb /f:"\\ServerName\OSupdate\BxxBCExx.SY3"
(Ex3) Update the OS with the OS image files and OSupdate.exe in the "OSUpdate" folder in micro SD card.
> "\Storage Card\OSupdate\OSUpdate.exe" /e
112