Denso BHT-1260BWB-CE User Manual page 146

BHT-1200 Series
[3] Scan Access points
To scan access points, tap the "Scan" button in the Profiles tab screen.
The following menus are displayed in the scan screen.
 Rescan
 Save...
 Create Profile... Create a new profile from the access point SSID.
Rescan
Tap the "Rescan" button to scan for surrounding access points.
The access points found are listed as shown on the right.
The maximum number of the scanned access points are 64.
The information for each access point is displayed on the lower half of the
screen by selecting each line in the list.
(1) BSSID
The access point MAC address
(2) SSID *
The access point SSID
* "(Hidden)" is displayed when the access point SSID is hidden.
(3) Security
ENABLE:
DISABLE:
(4) Channel
Channel that the access point uses.
(5) Signal Strength
Radio field strength of the access point.
Some access points may not be found If profiles are already set. If any access points are not
 Note 
found, rescan access points multiple times or retry a scan after deleting profiles.
134
Rescan access points.
Save the result of a scan.
Authentication or Encryption is required.
Both Authentication and Encryption are not required.