Denso BHT-1260BWB-CE User Manual page 200

BHT-1200 Series
 Settings
The Settings menu is used to change the password, font size and other options.
The settings are saved to the ini-file when the OK button is pressed.
Password : Administrator password (Default : no password)
Taskbar : Taskbar Hide/Show in the user mode (Default : Show)
Enable 10-key : When checked, the applications start up by pressing the numeric
key corresponding to the number displayed in the list. Default is unchecked.
Keystroke time interval : Time intervals between each keystroke determines the
application number. (Default: 2 seconds)
The specified time interval takes effect when the menu has over 10 applications.
If there are more than 10 applications in the list, the application numbers are
displayed as two digits numbers.
For example, when the both application number "01" and "10" exist, the "01"
application starts up if the "0" key is not pressed within 2 seconds after the "1" key is pressed.
Menu Font / Size : The list is displayed with the selected font and size. (Default : Tahoma)
HVGA: HVGA mode font size: 1 to 72pt, Default:15 pt
QVGA: QVGA mode font size: 1 to 72pt, Default:12 pt
H1.5: HH.15 mode font size: 1 to 72pt, Default:12 pt
VGA: VGA mode font size:
Default: Restore the font and size to default.
Refer to "Value List" in the "Configuration file (CeAdmin.ini file)" section for each value range of the settings.
188
1 to 72pt, Default:22 pt