Denso BHT-1260BWB-CE User Manual page 188

BHT-1200 Series
USB Interface Test
Tap the "1:USB" button in the COM menu to start the USB interface test.
The BHT starts connecting to the host computer using
ActiveSync/WMDC.
The pop-up dialog is displayed during connection.
Tap the "Hide" button to close the dialog or the "Cancel" button to cancel
the test.
If the ActiveSync/WMDC connection is established...
If the ActiveSync/WMDC connection is established, the "Network Begin"
message sounds and the ActiveSync/WMDC icon is displayed in the task
bar (red circle shown on the right).
If the ActiveSync/WMDC connection fails...
If the ActiveSync/WMDC connection fails, the ActiveSync icon is not displayed in the task bar.
176