Denso BHT-1260BWB-CE User Manual page 163

Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
[7] A2DP
The A2DP(Advanced Audio Distribution Profile) is used to transfer a stereo audio signal.
Make sure that the remote device is paired with the local device before using the A2DP service.
To use, double tap the "Audio Stereo" icon or select "Connect" in the contextual menu shown by holding
down the "Audio Stereo" icon.
.
The connection status of the service is shown as below.
Service is not connected Service is connected
If the connection fails, the error message shown below is displayed.
To change the audio profile, select "Properties" in the contextual menu shown by holding down the "Audio
Stereo" icon.
151