Denso BHT-1260BWB-CE User Manual page 64

BHT-1200 Series
PC Connection
"PC Connection" is used to connect the BHT to a computer.
To change the BHT connection to the computer, double tap the PC
Connection icon in the Control Panel to open the PC Connection
Properties.
Then tap the "Change Connection..." button to change the connection
method.
System
"System" is used to change the windows System Properties.
To open the windows System Properties, double tap the System icon in the
Control Panel
Tap "General" tab to open the General menu.
General menu shows the basic windows system information.
Tap "Memory" tab to open the Memory menu.
The Memory menu is used to check the memory allocation and free space
of the RAM memory, and change the RAM memory allocation.
Allocate the memory between "Storage memory" and
 Note 
"Program memory" based on the operating
requirements.
Depending on the memory allocation (e.g., insufficient
program execution space), the BHT may not operate
normally.
Power
Double tap the Power icon in the Control Panel to open the Power
Properties menu.
"Wakeup" tab is used to set up when the BHT wakes up from a powered
off state.
52