Denso BHT-1260BWB-CE User Manual page 112

BHT-1200 Series
(2)Application Launcher options
Enable Application Launcher
Check the box to start up the application launcher at reset /full-reset.
Uncheck the box so as not to start up. Default is unchecked.
Disable ActiveSync autoconnect
Uncheck the box to enable the ActiveSync/WMDC autoconnect while the application launcher is
activated. (Default)
Check the box to disable.
 Note  The ActiveSync / WMDC autoconnect enabled will not activate if the ActiveSync / WMDC
After the reset, full-rest or power-on (resume), the password entry screen is displayed if the device lock is
enabled, the application launcher is displayed if the application launcher is enabled.
Enter the correct password to login to the BHT when the password entry screen is displayed.
(Ex.) The device lock is enabled.
When the "FUNC", "ALP", "SHIFT" or "CAPS" key is pressed while the password entry screen is displayed,
the key names pressed are displayed on the screen as shown on the left below.
The message dialog on the right below is displayed when an incorrect password is entered.
100
automatic connection is set to disable in the advanced system menu [19].
(Ex.) The application launcher is enabled.