Resetting And Full Resetting; Full Reset Method - Denso BHT-1261QWB-CE Operator's Manual

Resetting and Full Resetting

Reset
Reset the BHT in the following cases.
 The BHT makes no response to entry from the touch screen or keys.
 Programs in the BHT malfunction for some unknown reason.
Reset Method
With the BHT power ON, press the reset key combination
(BKSP + Right Trigger + Power).
Then release all keys.
Point
Data stored as a file will not be lost even after resetting.
However, any data currently being edited will be lost.
Full Reset
Perform a full reset if the problem persists even after resetting.

Full Reset Method

With the BHT power ON, press the full reset key combination
(BKSP + ENT + Left Trigger + Power) more than 1 sec.
Then release all keys.
Point
When performing full reset, all data including files and settings stored in the RAM will also be
lost and the RAM will revert to the factory default. It is recommended that any important data
be backed up to the "FLASH" folder or to the computer before full reset. When the BHT turns
ON after the data in the RAM is deleted, the BHT starts from the "Initial Setup."