Denso BHT-1260BWB-CE User Manual page 98

BHT-1200 Series
User-defined virtual key
The user-defined virtual key can be assigned to the magic keys.
To use the user-defined virtual key, follow the steps below.
1. Write the codes for the virtual key to a text file.
2. Save the file in the BHT FLASH folder with the filename
"MKeyDef.txt".
This file is used as the user-defined code file.
In the example shown on the right, "ALT+X" and "ALT+Y" are added.
3. Double tap the "Key" icon in the System Properties.
The user-defined code file is read when the Key menu starts up.
Parameter
Name
Function name (to be
displayed in the list)
The number of the
key codes
Key code (Max. 4)
Code example
Function name
ALT+X
ALT+Y
The user-defined keys are displayed under the "Launch APP Key" in the order in which they are written in
the user-defined code file.
The example shown on the left, "ALT+X" and "ALT+Y" are added.
Refer to the BHT API Reference Manual or BHT Class Library Reference Manual for further details.
Launch APP key
The application launcher function can be assigned to the magic keys.
When the Launch APP key function is set to the magic key, the right screen
is displayed.
Set the application path and filename to run when the magic key is pressed.
Then select one of the following radio buttons.
False: Disable the multiple startups for the application ,
if checked. (the application starts up only once.)
True: Enables the multiple startups for the application,
if checked. (The application can start up multiple times.)
86
Meaning
Characters shown as
"Function name" in the code
example below.
The number of the key codes
to be sent when the Mx key is
pressed
Key code(s) to be sent
(Specify the same number of
the key codes as specified
in "Number of the key codes".)
The number of key codes
2
2
Value
Maximum 64
characters
1 to 4
ASCII characters
in hexadecimal
format 0xYY
Key code 1 Key code 2
0x12 (ALT) 0x58 (X)
0x12 (ALT) 0x59 (Y)