Denso BHT-1260BWB-CE User Manual page 162

BHT-1200 Series
[6] Object Push
To use the object push service, double- tap the "Object Push" icon or select
"Push file" in the contextual menu shown by holding down the icon.
The file selection dialog shown on the right is displayed,
then select the file to transfer.
To change the transfer speed, select "Properties" in the contextual menu shown
by holding down the "Object Push" icon.
The pop-up dialog shown on the right is displayed.
Check the box to set high speed file transfer for object push.
Uncheck the box to set low speed file transfer for object push.
Transfer speed Buffer size (KB)
Checked High Speed 5000
Unchecked Low Speed 64
150