Denso BHT-1260BWB-CE User Manual page 113

Configuration File (Startup.ini)
The configuration file does not exist at default.
The following file is created as the configuration file when the OK button is pressed in the General, Warning
Message or Password tab. (The file is not a registry file.)
\Flash\system\Startup.ini
The sample configuration file:
1:checked, 0:unchecked
DEVICELOCK_ENABLE=1
DEVICELOCK_PASSWORD=1234567890
DEVICELOCK_RESUME_ENABLE=0
DEVICELOCK_ENTERKEY_DISABLE=1
DEVICELOCK_ACTIVESYNC_DISABLE=1
DEVICELOCK_HIDE_WINDOWS_DESKTOP=0
DEVICELOCK_APP_PATH=\Windows\HtLogin.exe
APPLAUNCH_ENABLE=0
APPLAUNCH_ACTIVESYNC_DISABLE=0
 Note  This configuration ini-file can be copied to other BHTs, and work the same.
Copying the application launcher ini-file (CeAdmin.ini) together with the configuration
ini-file is recommended when using the application launcher.
Distributing the BHT backup file (*.dbk) together with the configuration ini-file is
recommended when kitting.
Refer to "4.11 Application Launcher" for details of the application launcher functions.
The password lock application default file name is "HTLogin.exe".
The default application can be changed to a user customized application such as a multiple users and
passwords manageable application.
There are two ways to change the default application.
(i) Overwrite the "HTlogin.exe" file.
(a) Copy the user customized application to the "Flash\Copyfile\Windows" folder.
(b) Perform full reset (cold boot).
The default application is replaced with the user customized application when the BHT restarts.
(ii) Change the application path and file name in the "\Flash\system\Startup.ini" file.
(a) Rewrite the application path and file name in the last statement of the Startup.ini file.
In the above example, the application path and file name is "\Windows\HtLogin.exe".
(b) Perform full reset (cold boot).
The user customized application is started up when the BHT restarts.
 Note  Controlling the ActiveSync autoconnect function when the device lock function is activated.
This function is executed within "HTLogin.exe". When replacing the application with
another application, set up the ActiveSync autoconnect by using the following function.
VC/++
BHT_SetSysSettingDW(BHT_ACTSYNC_AUTOCNCT,ACTSYNC_AUTOCNCT_DISABLE);
.NET (VB, C#)
COM.Settings. EnabledAutoActiveSyncIF
Refer to "BHT-1100 / 1200 API Reference Manual" and "BHT-1100 / 1200 Class Library
Reference Manual".
Barcode Handy Terminal/2D code Handy Terminal
' Enable password protection at reset
' Password
' Enable password protection at power on
' Disable Enter key Setup feature at full-reset
' Disable ActiveSync autoconnect
' Hide Windows desktop at Setup/Startup
' Htlogin.exe file path
' Enable Application Launcher
' Disable ActiveSync autoconnect
Hand Held Terminal
Barcode Handy Terminal
101