Denso BHT-1260BWB-CE User Manual page 67

Volume and Sounds
"Volume & Sounds" is used to change sound settings and adjust the
sound volume.
To change the volume and sounds, double tap the "Volume & Sounds"
icon in the Control Panel.
In the "Volume" tab, the following settings can be changed.
To change the settings below, tap the "Volume" tab.
 Sounds volume adjustment (0 to 5)
 Event sound enable/disable
 Application sound enable/disable
 Notification sound enable/disable
 Key clicks
 Screen taps
 Trigger Key clicks
In the "Sounds" tab, sounds for various events can be changed.
To change the settings, tap the "Sounds" tab.
In the "Application" tab, the following settings can be changed.
To change the settings, tap the "Application" tab.
Select one of the following three patterns to notify code scanning
completion, application and system warning.
Beeper : Beeper only (default)
Vibration : Vibrator only
Beeper/Vibration : Beeper and Vibrator
The vibrator can be controlled by adjusting the sound volume in the "Volume" tab.
 Note 
Level 0 (1st position from the left)
Level 1 (2nd position from the left) : Low level vibration
Barcode Handy Terminal/2D code Handy Terminal
: The vibrator is disabled
Hand Held Terminal
Barcode Handy Terminal
55