BHT-1200 Series
2.7.2
Removing the microSD or microSIM
Remove the microSD or microSIM card (option) from the BHT using the following procedure.
− Caution −
Always turn the BHT power OFF before removing the microSD or microSIM card.
Failure to follow instruction may result in the loss of data stored in the microSD or microSIM card.
1.
Remove the battery.
2.
Slide the microSD card holder to the unlock position
and then open it.
3.
Remove the microSD card from the holder slot.
− Point −
Insert the microSD or microSIM card straight into the slot.
Do not use excessive strength when inserting the microSD or microSIM card, so as
not to damage the cards and holders.
4.
Close the card holder and then slide the cover to the LOCK position
5.
Load the battery.
28
microSD card
microSIM card
holder
holder
microSD card
microSIM card