Denso BHT-1260BWB-CE User Manual page 105

[11] BHT Backup (Data Backup)
"BHT Backup" is used to back up and restore the data (files) in the RAM
memory and the registry.
Data or files in the flash memory or microSD cards are not supported by the
BHT Backup.
The backup data can be set to be automatically restored after a full reset
(cold boot). Refer to [12] Startup Configuration for automatic restore.
To back up or restore, double tap the "BHT Backup" icon in the System
Properties.
Store Selection:
Backup Date:
Backup:
Restore:
View:
Delete:
FLASH Disk:
Storage memory:
Storage Device:
Backup File:
The backup files are stored under the folder in the FLASH memory or microSD cards as shown below.
FLASH folder:
microSD card:
 Note 
After saving or deleting the backup file, change the auto restore settings explained in
A
"[12] Startup Configuration" as necessary.
f
Barcode Handy Terminal/2D code Handy Terminal
The location to store the backup file
Created date and time of the backup file
Proceeds with the backup process
Proceeds with the restore process
Displays the backup file information
Proceeds with the backup file delete process
FLASH memory free space (built-in)
RAM memory size to be backed up
Storage location of the backup file.
The device set in "[12] Startup Configuration" is displayed.
File name to be restored automatically.
The backup file name set in "[12] Startup Configuration" is displayed.
"Unselected" is displayed under the following conditions.
1) The backup file is not set.
2) The specified backup file does not exist.
\FLASH\System\Backup\
\Storage Card\System\Backup\
Hand Held Terminal
Barcode Handy Terminal
93