Denso BHT-1260BWB-CE User Manual page 71

"Resolution" tab in the Display properties is used to change the screen
resolution.
To change the resolution settings, tap the "Resolution" tab and select the
resolution mode.
Resolution mode:
HVGA (width 320 x height 480 pixels) (default)
QVGA (width 240 x height 320 pixels)
H1.5 (width 320 x height 320 pixels)
VGA (width 480 x height 640 pixels)
The settings are affected after the reset.
When QVGA mode is selected for the first time, the calibration screen
shown on the right is displayed after the BHT is reset.
Follow the instructions displayed on the screen to calibrate the touch
screen.
 Note 
HVGA mode is recommended particularly when changing
the BHT settings.
Some system setting tools such as the "Wireless LAN" (in
the System Properties < BHTShell) are built for the HVGA
screen.
If the QVGA mode is selected when a system setting tool
is used, the display images of these tools exceed the
actual screen size.
Input Panel
"Input Panel" is used to change the software keyboard settings.
To change the settings, double tap the "Input Panel" icon in the Control
Panel.
The "Options..." button in the Input Panel tab is used to switch the key
size of the software keyboard between "Large" and "Small".
To change the settings, tap the "Options..." button in the Input Panel tab.
 Note 
Gestures* are always active regardless of the above
settings, whether the "Use gestures for...," check box is
checked.
* Gestures refer to special stylus movements that
enable special input methods in the software keyboard
as shown on the right.
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
59