Daily Maintenance; Proper Care Of The Bht; Proper Care Of The Cu - Denso BHT-1260BWB-CE User Manual

BHT-1200 Series

6.5 Daily Maintenance

6.5.1 Proper Care of the BHT

Wipe any dirt from the BHT housing, charge terminals, and battery terminals with a dry, soft cloth.
Make sure to turn OFF the BHT before cleaning.
− Notes −  Never use substances such as benzene or alcohol, as this may cause the housing to be
marred or paint to be peeled off.
 Never rub or strike the LCD with anything hard, as this may result in scratches on the
screen or breakage.
 When cleaning the keypad, do not scrub the surface too hard or pull on the keys, as this
may break the keys.
 If excessively dirty, wipe with a soft cloth that has been soaked in soapy water (always
use a neutral detergent) and wrung out thoroughly.
Any dirt or dust adhering to the code reading window (clear plate) will degrade reading performance.
Check regularly whether any dust has accumulated on the code reading window (clear plate), if using
in dusty areas.
Follow the steps below to clean the code reading window.
・First, blow the dust away with an airbrush, and then gently wipe the plate with a cotton swab or
similar soft object.
・Then blow any particles away with an airbrush or wipe with a soft brush.
If sand or hard particles have accumulated, rubbing the window may result in scratches.

6.5.2 Proper Care of the CU

Unplug the AC adapter from the socket when cleaning the CU for safety.
Wipe any dirt from the housing or charge terminals with a dry, soft cloth.
212