Denso BHT-1260BWB-CE User Manual page 108

BHT-1200 Series
[NOTES] Command Prompt (CMD) specification
> BHTBackup [/b] [/r] [/f] [/bf] [/a] [/p] [/m] [/e]
/b
/r
/f "xxx"
/bf "xxx"
/a
/p
/m
/e
/h
- Note -
Return value
0 : Success.
1 : Canceled by user
2 : Error (other error)
3 : Error (invalid parameter)
4 : Error (file / path not found)
5 : Error (memory full)
6 : Error (restore is terminated due to unmatched OS version.)
Examples;
(Ex1) Displays both the "Backup start" and "Backup progress" messages,
and backs up to the "\Flash\System\Backup\Backup1.dbk" backup file.
> BHTBackup.exe /b /bf "Backup1" /a /p
(Ex2) Displays the "Error" message if an error occurs, restore data from the "\Storage
Card\System\Backup\Bkup.dbk" backup file.
> BHTBackup.exe /r /f "Storage Card" /e
96
Backup
Backup with the specified "folder" and "backup filename".
Backup file is created in "\<folder>\System\Backup\<filename>.dbk".
Restore
Restore with the specified "folder" and "backup filename".
Folder like "Flash", "Storage Card" and so on. Default is "Flash"
If a network folder is used, specify the full path starting with "\\".
If a blank character is included in the path, use "".
For example: /f "Storage Card"
For example: (Remote PC name is ServerPC)
/f "\\ServerPC\CommonFolder"
Backup filename. Default is "Bkup".
If a blank character is included in the filename, use "".
Display "Backup start" message dialog. Default : Suppress the dialog.
Display "Backup progress" message dialog. Default : Suppress the dialog.
Display "Backup end" message dialog. Default : Suppress the dialog.
Display "Error" message dialog. Default : Suppress the dialog.
Help
- Both '/' and '-' can be used for the option delimiter.
- Both lower case and upper case characters can be used.