Denso BHT-1260BWB-CE User Manual page 178

BHT-1200 Series
[1] EAN/UPC (EAN-13/UPC-A, EAN-8, UPC-E)
The parameter screen shown on the right is displayed when "EAN/UPC" is
checked in the Read Code menu.
Tap each tab, to set up the parameters for EAN-13/UPC-A, EAN-8 or
UPC-E.
Code: Enables the code reading.
+AddOn: Enables the add-on code reading.
For the BHT-1200B, the readable add-on codes can be
selected by checking a radio button listed below.
all (w&w.out)
W AddOn 2 & 5
W AddOn 2
W AddOn 5
[2] CODE39, CODABAR, ITF, STF
The parameter screen shown on the right is displayed when "CODE39",
"CODABAR", "ITF" or "STF" is checked in the Read Code menu.
Code: Enables the code reading.
Specify the minimum and maximum numbers of digits to be
read, if the code is enabled.
The codes within the specified range are read.
Check Digit: Enables reading of only codes with check digit.
[3] CODE93, CODE128
The parameter screen shown on the right is displayed when "CODE93" or
"CODE128" is checked in the Read Code menu.
Code: Enables the code reading.
Specify the minimum and maximum numbers of digits to be
read,
if the code is enabled.
The codes within the specified range are read.
166
Readable codes
No With 2 digit
add-on add-on
√ √
– √
– √
– –
With 5 digit
add-on
√
√
–
√