Denso BHT-1260BWB-CE User Manual page 164

BHT-1200 Series
[8] HSP
The HSP(Headset Profile) is used to connect to the Bluetooth Headsets.
Make sure that the remote device is paired with the remote device before using the HSP service.
To use, double tap the "HSP" icon or select "Connect" in the contextual menu shown by holding down the
"HSP" icon.
The paring and connection status with the remote device is shown as below.
HSP is not paired HSP is paired HSP is paired and connected
The connection status of the service is shown as below
Service is not connected Service is connected
To change the headset profile, select "Properties" in the contextual menu shown by holding down the
"HSP" icon
The "Properties" pop-up dialog is displayed.
Use the slider to adjust the speaker and microphone volume levels.
Check the box to enable the power safe mode, uncheck the box to disable.
152