Denso BHT-1260BWB-CE User Manual page 180

BHT-1200 Series
[7] QR (Model1, Model2, MicroQR, SQRC), iQR
The parameter screen shown on the right is displayed when "QR" or "iQR" is
checked in the Read Code menu.
Code: Enables the code reading.
Specify the minimum and maximum versions to be read,
if the code is enabled.
The codes within the specified range are read.
The screen shown on the right is displayed when the "Split" tab is tapped.
Split： Enables the split QR codes reading.
Select a radio button from the following three choices to set up
how the split QR codes are handled.
"EDIT":
"BATCH": The scanned data is reconstructed as a single QR
"NONE": The scanned data is sent out each time when a single
The screen shown on the right is displayed when the "SQRC" tab is tapped.
Code: Enables the SQRC code reading.
Specify the minimum and maximum versions to be read,
if the code is enabled.
The codes within the specified range are read.
Encryption Key Mismatch:
Select the radio button to determine how the BHT reads the
SQRC codes when the encryption key does not match.
"NONE": SQRC code is not read.
"PUBLIC DATA ONLY":
[8] Data Matrix (Square, Rectangle)
The parameter screen shown on the right is displayed when "Data Matrix" is
checked in the Read Code menu.
Code: Enables the code reading.
Specify the minimum and maximum versions to be read,
if the code is enabled.
The codes within the specified range are read.
168
The scanned data is accumulated and edited before
sending out. (The split SQRC codes cannot be read.)
code and sent out when all split codes divided from
a single QR code are read at once.
(Only for QR codes).
split QR code is read.
Reads only the SQRC code public data.