Charging The Spare Battery - Denso BHT-1260BWB-CE User Manual

9.5.3

Charging the spare battery

To charge the spare battery, set the spare battery in the CU.
1.
Turn ON the CU.
The Power/Communications LED illuminates in green.
2.
Load the battery in the CU spare battery charge slot.
The Spare battery charge LED illuminates in red and the CU starts charging.
Charging Time
Rechargeable battery
Large-capacity rechargeable battery
The spare battery charge LED changes to green when charging is completed.
3.
Remove the battery from the CU.
Barcode Handy Terminal/2D code
Approx. 3 hours
Approx. 4.5 hours
①
②
235