Denso BHT-1361QWB-CE Hardware User Manual
  1. Manuals
  2. Brands
  3. Denso Manuals
  4. Touch terminals
  5. BHT-1361QWB-CE
  6. Hardware user manual

Denso BHT-1361QWB-CE Hardware User Manual

Barcode / 2d code handy terminal
Hide thumbs Also See for BHT-1361QWB-CE:
Table of Contents

Advertisement

Quick Links

See also: Software User Manual
Barcode /
Barcode /
2D code Handy Terminal
2D code Handy Terminal
BHT-1361QWB-CE
BHT-1361QWB-CE
BHT-1361Q-CE
BHT-1361Q-CE
BHT-1361BWB-CE
BHT-1361BWB-CE
BHT-1361B-CE
BHT-1361B-CE
Hardware User's Manual
Hardware User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BHT-1361QWB-CE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Denso BHT-1361QWB-CE

Summary of Contents for Denso BHT-1361QWB-CE

  • Page 1 Barcode / Barcode / 2D code Handy Terminal 2D code Handy Terminal BHT-1361QWB-CE BHT-1361QWB-CE BHT-1361Q-CE BHT-1361Q-CE BHT-1361BWB-CE BHT-1361BWB-CE BHT-1361B-CE BHT-1361B-CE Hardware User’s Manual Hardware User’s Manual...
  • Page 2 3) The modification of DENSO WAVE's products by parties other than DENSO WAVE.  If it is determined by DENSO WAVE INCORPORATED that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the...
  • Page 3 Barcode / 2D Code Handy Terminal Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges. ...
  • Page 4 The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.  Every reasonable effort has been taken to ensure that the information contained in this manual is complete and accurate; however, should you notice any questionable points, errors or omissions, please contact DENSO WAVE. ...
  • Page 5 Barcode / 2D Code Handy Terminal Related Documentations  User’s Manual (Software)  BHT API Reference Manual  BHT Class Library Reference Manual  Bluetooth Library Reference Manual  kbifCE User’s Guide  SQRC Setting User’s Guide  Remote Desktop Plug-in Reference Manual...
  • Page 6 BHT-1300-CE Series SAFETY PRECAUTIONS Be sure to observe all these safety precautions.  Read through this manual carefully. It will enable you to use the BHT and CU correctly.  Always keep this manual nearby for easy reference. Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury and substantial property damage.
  • Page 7 Barcode / 2D Code Handy Terminal Handling the battery Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.  Do not disassemble or modify the battery.  Do not connect the battery (+) and (-) terminals with a metal object such as a wire. ...
  • Page 8  Do not use the BHT with the damaged case.  Do not use the power supply other than the battery specified by DENSO WAVE.  Do not ingest or inhale liquid crystal､and do not contact liquid crystal with skin, in the event of liquid crystal leaking out of a broken LCD screen.
  • Page 9 Barcode / 2D Code Handy Terminal Handling the BHT Failure to follow all instructions listed below may cause not only incorrect operation, but also overheating, smoking and malfunction.  When using the hand belt, avoid getting it caught in other objects or entangled it in rotating machinery. ...
  • Page 10 (tüüp: DWWB003). Moodul ja kaart vastavad direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. Español: Por medio de la presente, DENSO WAVE INCORPORATED declara que cada uno de los dispositivos BHT-1361BWB-CE y BHT-1361QWB-CE contiene un Módulo de red LAN y Bluetooth ®...
  • Page 11 Barcode / 2D Code Handy Terminal Magyar: Ezennel a DENSO WAVE INCORPORATED kijelenti, hogy a BHT-1361BWB-CE és a BHT-1361QWB-CE eszköz vezeték nélküli LAN és Bluetooth ® modult tartalmaz (típus: DWWB003). A modul és a lapka megfelel az 1999/5/EK irányelv alapvető követelményeinek és egyéb vonatkozó előírásainak.
  • Page 12 BHT-1300-CE Series...

  • Page 13: Table Of Contents

    BHT-1300-CE Series Chapter 1 Outline This chapter describes the BHT system and provides an overall outline of the BHT. System Configuration ···································································· 2 1.1.1 Hardware Configuration ····································································2 1.1.2 Software Configuration······································································3 Components and Functions ···························································· 4 1.2.1 BHT Front/Rear ···············································································4 1.2.2 Keypad ··························································································5 1.2.3 BHT Screen ····················································································7...

  • Page 14: System Configuration

    BHT-1300-CE Series 1.1 System Configuration This section describes the hardware and software required for the code data collection system using the BHT. 1.1.1 Hardware Configuration The following figure shows the required hardware for the BHT barcode data collection system. The required hardware varies according to the communication used. Wireless communication Ethernet...

  • Page 15: Software Configuration

    Barcode / 2D Code Handy Terminal 1.1.2 Software Configuration [1] BHT Operating System (OS) Microsoft Windows Embedded Compact 7 [2] Application Program Development Environment Refer to "BHT API Reference Manual" and "BHT Class Library Reference Manual”.

  • Page 16: Components And Functions

    BHT-1300-CE Series 1.2 Components and Functions 1.2.1 BHT Front/Rear (11) (10) (12) Name Function and Description LCD (Liquid crystal display) Displays the characters and graphic patterns. Indicator LED Indicates the code read status. Illuminates in blue when the BHT has successfully read a code. Press this when scanning a code.

  • Page 17: Keypad

    Barcode / 2D Code Handy Terminal 1.2.2 Keypad The BHT key functions can be set at user programs. The figure below shows an example of settings for each key function. (10) (11)～(14) Name Function and Description Used to move the cursor and select menus. Cursor keys Magic [M1]...
  • Page 18 BHT-1300-CE Series Name Function and Description Used to enter data. Numerical keys Deletes the last entered character (backspace). When pressed and held for 1 Backspace/clear second or more, cancels entry and returns the LCD display to the previous screen (clear.) Enter key Press to finalize entered data or execute operations.

  • Page 19: Bht Screen

    Barcode / 2D Code Handy Terminal 1.2.3 BHT Screen .2.3 BHT Screen All screens in this User’s Manual are simulated. Actual screens may differ depending on user settings and All screens in this User’s Manual are simulated. Actual screens may differ depending on user settings and other factors.
  • Page 20 BHT-1300-CE Series Shows the software keyboard status. (Tap this icon to display/hide the software keyboard, or switch the keyboard status ON/OFF.) : Shows that the software keyboard is ON. : Shows that the software keyboard is OFF. Shows that the CPU is in standby mode. ( This icon does not show in taskbar by default settings.
  • Page 21 BHT-1300-CE Series Chapter 2 BHT Prepara tion This chapter describes inserting and charging th e battery cartridge, turning the BHT power ON and OFF, and use of the hand strap. “BHT Preparation” Procedure ··························· ·····························10 Loading and Charging the Battery Cartridge ········ ·····························10 2.2.1 Battery Power Level Indicator ··························...

  • Page 22: Bht Preparation" Procedure

     Terminate charging if not completed even after the specified time has elapsed.  Do not use battery cartridges other than that specified by DENSO WAVE.
  • Page 23  Caution  Do not use battery cartridges other than that specified by DENSO WAVE. Terminals Insert the battery cartridge cover tab (1), and then close the battery cartridge cover (2) to lock the cover in position.
  • Page 24 BHT-1300-CE Series Connect the dedicated AC adapter to the DC input connector on the charger and plug the adapter into the wall socket.  Note  Power for the CU-1321 can be obtained from a USB connection port (host computer or hub), however, charging is not possible while the host computer is in suspend mode.
  • Page 25 Barcode / 2D Code Handy Terminal The BHT indicator LED will chang e to green when chargin g is complete. The LED illuminates in green hen charging completes. LED green ON  Notes  Charging takes approximately 3.5 hours to charge the BT-20LB and 2.5 hours to charge the ...
  • Page 26 BHT-1300-CE Series Charging with the batter y charger (CH-201A) Terminals Check the battery cartridge terminals and insert the cartridge. Connect the power cable to the CH-201A and LED red ON connect the plug to a commercial AC power source (100 V AC). The LED will turn red when charging is commenced.
  • Page 27 Do not use battery cartridges other than Terminals that specified by DENSO WAVE. Insert the battery cartridge cover tab (1), and then close the battery cartridge cover (2) to lock the cover in position. Press the battery cover into place until a click is heard.
  • Page 28 BHT-1300-CE Series Incorrect handling of the battery cartridge could cause the batteries to generate heat or smoke, or to rupture or burn. This is DANGEROUS. Be sure to observe the following Never disasse mble or modify the battery cartridge.  Never connect the positive (+) and negative (-) terminals of the battery cartridge with a wire o ...

  • Page 29: Battery Power Level Indicator

    Barcode / 2D Code Handy Terminal 2.2.1 Battery Power Level Indicator The battery power level can be checked with the icon (battery power level indicator) shown in the taskbar. The icon shows th e battery power in four levels. These levels are only a roug h estimate of battery power, make sure to charge the battery before running out of power.

  • Page 30: Attaching The Hand Strap

    BHT-1300-CE Series 2.3 Attaching the Hand Strap Attach the hand strap to prevent the BHT f rom being accidentally dropped during use. 2.3.1 Attaching the Hand Strap Attach the han d strap as shown below. 2.3.2 Holding the BHT Attach the hand strap to your wrist an d hold the BHT as shown below.

  • Page 31: How To Use The Touch Screen

    Barcode / 2D Code Handy Terminal 2.3.4 How to use the touch screen Select the buttons and menus shown on the LCD tou ch screen with the accompanying stylus. Action Description Means tapping the touch screen once. Similar to a “click” of a computer mouse. Double-tap Means tapping the touch sc reen quickly twice.

  • Page 32: Initial Setup

    BHT-1300-CE Series 2.4 Initial Setup Press the power key to turn ON the BHT. When turning ON the BHT for the first time or after a long period of time, perform a “full reset” at first if the dialog box is not displayed.

  • Page 33: Turning Off The Power

    Barcode / 2D Code Handy Terminal 2.5 Turning OFF the Power se one of the foll owing three methods t o turn OFF the BHT.  Pr Normal pow er OFF ess the power key.  Hold down the Turning the power OFF after registry b ackup SF key and press the power key for 3 seconds or more.

  • Page 34: Resetting And Full Resetting

    BHT-1300-CE Series 2.6 Resetting and Full Resetting 2.6.1 Reset Reset the BHT in the following cases.  The BHT does not respond to an entry from the touch screen or keys.  Programs in the BHT malfunction for some unknown reason. 2.6.2 Reset Method With t he BHT power ON, press th...

  • Page 35: Memory Contents After Reset/Full Reset

    Barcode / 2D Code Handy Terminal 2.6.5 Memory Contents after Reset/Full Reset Reset Full Reset Data in the “FLASH” folder Data retained Data retained (on-board F LASH memory) Data in the "Storage Card" fold Data retained Data retained (SD Card Data in other folders Data retained Data erased...

  • Page 36: Inserting And Removing The Microsd Card

    BHT-1300-CE Series Inserting and Removing the microSD Card How to insert the microSD card Insert the microSD (option) card in the following procedure. Remove the battery cartrige. Slide the microSD card cover in the OPEN direction (1) to unlock the cover and open the microSD card cover in the direction (2).
  • Page 37 Barcode / 2D Code Handy Terminal Close the microSD card cover in the direction (1) and slide it in the LOCK direciton (2) to lock the card cover. ① ② Install the battery cartridge. ② ① ③ How to remove the microSD card Remove the microSD (option) card in the following procedure.
  • Page 38 BHT-1300-CE Series Remove the microSD card from its slot card cover. microSD card  Caution  Remove the microSD card directly from the slot along its lines. Do not pull the card too hard when removing the card. The microSD card or its card cover may be broken if excessive strength is applied Close the microSD card cover in the direction (1) and slide it in the LOCK direciton (2) to lock the card cover.
  • Page 39 BHT-1300-CE Series Chapter 3 Basic Operation This chapter describes basic operations such as barcode scanning, numerical data entry and item selection using the BHT, basic changes to settings, and BHT data transmission. Reading Barcodes or 2D Codes ·····················································28 Turning ON/OFF the Backlight ·······················································31 Using the Keypad ········································································32 3.3.1 Entering Numerical Data··································································...

  • Page 40: Reading Barcodes Or 2D Codes

    BHT-1300-CE Series 3.1 Reading Barcodes or 2D Codes Follow the procedure below to scan barcodes. Turn the BHT power ON. Power key Press the trigger switch. The BHT emits a guide marker (laser light) and the light for reading. Guide marker Guide marker BHT-1361QWB/Q-CE BHT-1361BWB/B-CE...
  • Page 41 Barcode / 2D Code Handy Terminal  Notes  If required, clean dirty labels before reading.  It may not be possible to perform reading in direct sunlight.  If the code is on a curved surface, flatten the label surface and read it again. ...
  • Page 42 BHT-1300-CE Series When unable to successfully read codes… Cause Countermeasure Change the BHT reading angle and try again. When the light is focused on the Specular printed surface of the code from BHT-1361QWB/Q-CE reflection directly above, the BHT may not read the code due to specular reflection.

  • Page 43: Turning On/Off The Backlight

    Barcode / 2D Code Handy Terminal 3.2 Turning ON/OFF the Backlight To turn the backlight ON or OFF, hold down the SF key and press the M4 key. Hold down the SF key and press the M4 Key. Backlight OFF or dim (backlight function enabled) If no key is Press any key or tap...

  • Page 44: Using The Keypad

    BHT-1300-CE Series 3.3 Using the Keypad 3.3.1 Entering Numerical Data The default entry mode is numeric, enabling numbers written on the top of numeric keys to be entered. To enter “120” for example, press the “1”, “2” and “0” keys sequentially. If the wrong number is incorrectly entered, press the BS/C key to delete the number and then re-enter the correct number.

  • Page 45: Transmitting Data

    Barcode / 2D Code Handy Terminal 3.4 Transmitting Data ® Ethernet, USB, Bluetooth or wireless communication* can be used to transmit data collected by the BHT to the host computer. The data transmission method and BHT setting method varies depending on the system used, contact the system administrator for operation details ...

  • Page 46: Usb Communication

    BHT-1300-CE Series 3.4.1 USB Communication The CU-1321 connects to the host computer via USB connection. Place the BHT in the CU-1321 to transmit data. communication Host Computer CU-1321...

  • Page 47: Bluetooth Communication

    Barcode / 2D Code Handy Terminal ® 3.4.2 Bluetooth Communication ® The Bluetooth interface permits wireless communications with other Bluetooth enabled devices. ® Bluetooth communication ® Bluetooth -enabled devices The BHT supports the following profiles: - Generic Access - Serial-DevA - Serial-DevB - Service Discovery - FTP...

  • Page 48: Wireless Communication

    BHT-1300-CE Series 3.4.3 Wireless Communication Wireless communication to the host computer via the wireless LAN access point. A wireless local area network between the BHT and wireless LAN access point is required to communicate with the wireless LAN access point. Wireless communication Ethernet...
  • Page 49 BHT-1300-CE Series Chapter 4 Communication This chapter describes technical information relating to the infrared communication, wireless communication, and Bluetooth® communication functions with which the BHT is equipped. ® Bluetooth Communication····························································38 ® 4.1.1 Notes for Bluetooth communication ·················································· 38 Wireless Communication ······························································39 4.2.1 Notes for Wireless Communication ····················································...

  • Page 50: Bht-1300-Ce Series

    BHT-1300-CE Series ® 4.1 Bluetooth Communication ® The BHT has an internal Bluetooth wireless module. ® 4.1.1 Notes for Bluetooth communication  The 2.4 GHz band used in the BHT travels in a straight line and has a trouble passing through human ®...

  • Page 51: Wireless Communication

    Barcode / 2D Code Handy Terminal 4.2 Wireless Communication The BHT has a wireless module using the 2.4 GHz and 5GHz bands. 4.2.1 Notes for Wireless Communication  The 2.4 GHz band used in the BHT travels in a straight line and has a trouble passing through human bodies and other objects.

  • Page 52: Activesync / Windows Mobile Device Center

    BHT-1300-CE Series ActiveSync / Windows Mobile Device Center ActiveSync/Windows Mobile Device Center (WMDC) enables the following features by connecting the BHT to the host computer via the CU-1321.  Synchronize data  Backup data  Copy or move data  Debug user programs Download the software for the host computer operating system from the Microsoft web site.
  • Page 53 BHT-1300-CE Series Chapter 5 Maintenance This chapter describes battery cartridge and daily procedures for taking care of the BHT, CU and CH. Replacing the Battery Cartridge······················································42 5.1.1 Battery Cartridge Service Life ··························································· 42 5.1.2 Battery Cartridge Replacement Method ·············································· 42 Replacing the Backup Battery ························································44 Using the BHT after Long Periods···················································45 Daily Maintenance ·······································································46...

  • Page 54: Replacing The Battery Cartridge

    Check the battery cartridge terminals on the new battery cartridge and then insert in the direction shown by the arrow. Refer to “Chapter 2 BHT Preparation” – “2.2 Loading and Charging the Battery Cartridge”.  Caution  Do not use battery cartridges other than that specified by DENSO WAVE.
  • Page 55 Barcode / 2D Code Handy Terminal Insert the battery cartridge cover tab (1), and then close the battery cartridge cover (2) to lock the cover in position. Press the battery cover into place until a click is heard. ② ① ③...

  • Page 56: Replacing The Backup Battery

    BHT-1300-CE Series 5.2 Replacing the Backup Battery Contact your dealer to replace the backup battery if the following warning message is displayed. This warning message is displayed each time the power turns ON after the backup battery has fully discharged 200 times or more.

  • Page 57: Using The Bht After Long Periods

    Barcode / 2D Code Handy Terminal 5.3 Using the BHT after Long Periods Data stored in the BHT may be lost and the calendar clock may stop if the BHT is left unused for long periods of time. The RAM will revert to the factory default when performing full reset. Back up any important data to the “Flash” folder or to the computer before full reset.

  • Page 58: Daily Maintenance

    BHT-1300-CE Series 5.4 Daily Maintenance 5.4.1 Proper Care of the BHT Wipe any dirt from the BHT housing, charge terminals, and BHT or battery cartridge terminals with a dry, soft cloth. Ensure to turn OFF the BHT before cleaning.  Cautions  Never use substances such as benzene or alcohol, as this may cause the housing to be marred or ...
  • Page 59 BHT-1300-CE Series Chapter 6 Specifications This chapter describes the BHT-1300-CE Series specifications. BHT-1300-CE Series Specifications ················································48 6.1.1 Hardware Specifications ·································································· 48 6.1.2 Code Specifications········································································ 49 6.1.3 Scanning Performance and Field of View ············································ 53 6.1.4 Interface Specifications ··································································· 57...

  • Page 60: Bht-1300-Ce Series Specifications

    BHT-1300-CE Series 6.1 BHT-1300-CE Series Specifications 6.1.1 Hardware Specifications Power supply (main power): Rechargeable lithium-ion battery cartridge (3.7 V DC) Dimensions (W) x (L) x (H): 52.5 x 158 x 28.5 mm (including a standard battery cartridge) 52.5 x 158 x 24 mm (including a slim-type battery cartridge) Weight: Approx.

  • Page 61: Code Specifications

    Barcode / 2D Code Handy 6.1.2 Code Specifications Supported Code Types The values given here are defined at the scanning reference position. Refer to “6.1.3 Scanning Performance and Field of View” for details. (1) BHT-1300Q-CE Series QR code (Model 1, Model 2) and Micro QR code Code size Cell pitch QR code...
  • Page 62 BHT-1300-CE Series Barcodes Scan Magnifications or digit Supported Barcode Types Bar Dimensions numbers Universal product codes EAN-13 0.26 to 0.50 mm 0.8 to 1.5 times EAN-8 0.26 to 0.66 mm 0.8 to 2.0 times UPC-A with add-on (17 digits) 0.26 to 0.36 mm 0.8 to 1.0 times UPC-E with add-on (12 digits) 0.26 to 0.60 mm...
  • Page 63 Barcode / 2D Code Handy (2) BHT-1300B-CE Series Barcodes Scan Magnifications or digit Supported Barcode Types Bar Dimensions numbers Universal product codes EAN-13 0.26 to 0.50 mm 0.8 to 1.5 times EAN-8 0.26 to 0.66 mm 0.8 to 2.0 times UPC-A with add-on (17 digits) 0.26 to 0.36 mm 0.8 to 1.0 times...
  • Page 64 BHT-1300-CE Series Multiline codes Multiline reading can be performed up to a maximum of 3 lines at a time in the specified order on the following codes: Universal product codes, Interleaved 2of5 (ITF), Codabar (NW-7), Code 39, Code93 and Code 128 (EAN-128). This reading is selectable only with application programs.

  • Page 65: Scanning Performance And Field Of View

    Barcode / 2D Code Handy 6.1.3 Scanning Performance and Field of View (1) BHT-1300Q-CE Series Scanning Reference Position As illustrated at left, align the reading window with the center of the label (code) to be scanned. Label Reading Distance and Field of View Scanning reference position (100 mm) 0.25 mm 0.33 mm...
  • Page 66 BHT-1300-CE Series QR code cell pitch dimensions Valid reading distance 0.25 mm 45 to 145 mm *1 0.33 mm 60 to 205 mm *2 0.50 mm 70 to 275 mm *3 PCS value: 0.9 min., White reflection intensity: 85% min Under the following conditions: Under the following conditions: QR Code Model 2:...
  • Page 67 Barcode / 2D Code Handy (2) BHT-1300B-CE Series Scanning Reference Position H=50mm As illustrated at left, align the reading window Label with the center of the label (code) to be scanned. Reading Distance and Field of View 360 mm 490 mm 640 mm 44 mm Central scanning axis...
  • Page 68 BHT-1300-CE Series Narrow bar width Distance from barcode to reading window 0.12 mm 40 ≤ H ≤ 100 mm *1 0.15 mm 30 ≤ H ≤ 150 mm *2 0.33 mm 20 ≤ H ≤ 370 mm *3 0.5 mm H ≤...

  • Page 69: Interface Specifications

    Barcode / 2D Code Handy 6.1.4 Interface Specifications USB Interface Communication method: USB OTG 2.0, Full-speed compliant ® Bluetooth Interface ® Specification: Bluetooth Ver. 2.1 + EDR compliant RF output: Class 2 (2.5 mW max.) Supported profiles: - Generic Access - Serial-DevA - Serial-DevB - Service Discovery...
  • Page 70 BHT-1300-CE Series...
  • Page 71 BHT-1300-CE Series Appendix This chapter describes the CU-1300 Series (option) specifications, and describes causes and countermeasures when unable to transfer files. Appendix CU-1300 Specifications··························································60 (1) Hardware Specifications ········································································ 60 (2) Charging Requirements (CU-1321)·························································· 60...
  • Page 72 BHT-1300-CE Series Appendix CU-1300 Specifications (1) Hardware Specifications CU-1321 Power supply: Powered from the USB interface * Max. power consumption: 5V at 500 mA Dimensions (W) x (L) x (H): 95 x 110 x 109 mm Weight: 160 g Ambient operating temperature: 0 to 40...
  • Page 73 Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Barcode / 2D Code Handy Terminal BHT-1361QWB-CE BHT-1361Q-CE BHT-1361BWB-CE BHT-1361B-CE User’s Manual...

This manual is also suitable for:

Bht-1361q-ceBht-1361bwb-ceBht-1361b-ce

Table of Contents