BHT-1200 Series
Startup Launcher: Automatically launches any application
Wait N Seconds :
Windows "Startup" folder...: Open the "\Windows\Startup" folder with file explorer
Flash "Startup" folder...:
Note
Warning Message
"Warning Message" tab in the "Startup Config" menu is used to enable or
disable error messages listed below.
(1) "Registry settings have been lost" error message
(2) "Service life warning for backup battery" error message
(3) "Date/Time Properties" error message" error message
To enable the messages, check each box.
To disable the messages, uncheck each box.
No.
Message
(1)
(2)
(3)
Refer to Chapter 7, 7.1 System Errors for more details of error messages.
98
Wait specified second(s) and execute a startup application. (default:0)
(Range : 0 to 10)
For example "wait a few seconds till network is connected
and execute a startup application"
Open the "\FLASH\Startup" folder with file explorer
"Automatic Application Launch" is not performed if no files exist in the above
folder, even if each of the corresponding functions is selected.
Error message is displayed
when;
The power is turned ON.
(Only after full reset)
The power is turned ON.
The power is turned ON.
(Only in case the time and
date settings are lost after
full-reset)
Default
Enable
Enable
Enable