Setting Parameters - Denso BHT-1260BWB-CE User Manual

BHT-1200 Series

5.2.2 Setting Parameters

 Bluetooth
The remote devices return these addresses, uniquely assigned to each Bluetooth
®
Bluetooth SIG, during device detection.
 Bluetooth
The bluetooth® device name is a user-friendly name (Robert or Sandra, for example) which allows users
to identify devices more easily.
 Bluetooth
The bluetooth
Bluetooth pairing to establish secure links between two Bluetooth devices.
 Security Modes
The BHT supports the following three security modes.
(1) No security:
(2) Service level security:
(3) Link level security:
Setting "No security" sometimes interferes with connecting to remote devices using "Service level
security" or "Link level security"--unless both devices use the same Bluetooth
Use the same Bluetooth® passkey used for the target device when setting the BHT to "Service level
security" or "Link level security".
198
®
device address
®
device name
®
passkey (Bluetooth
® ®
passkey (Bluetooth PIN) is an encryption key used for mutual authentication and
No security authentication.
Security authentication is required.
Security authentication using point-to-point encryption keys are required.
®
PIN)
®
device by the
®
passkey.