Denso BHT-1260BWB-CE User Manual page 197

 Trace (Start / Stop Trace)
The "Start Trace" button is used for the administrator to find non-listed application full paths and to add to the
application list.
An application full path is displayed when a non-listed application is started up during the trace mode, then a
pop-up dialog is displayed to prompt to save the path.
A list of all saved application paths is displayed when the trace mode is stopped.
The listed application can be added to the user or admin list.
For example; To add Windows Explorer to the user list, follow the steps below.
1. Tap the "Start Trace" button.
The pop-up dialog shown on the right is displayed, then tap the "Yes" button to
start trace mode.
The "Start Trace" button text changes to "Stop Trace".
The "Stop Trace" button is used to stop trace mode.
2. Tap the "Start" menu, then select Windows Explorer from the Programs folder.
3. The message dialog that shows Windows Explorer full path is displayed
when the Application Launcher detects that Windows Explorer has been started.
The message is displayed when the detected application is not listed in the
user mode or traced for the first time.
Tap the "Yes" button to add Windows Explorer to the trace results list.
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
185