Denso BHT-1260BWB-CE User Manual page 62

Barcode/2d code handy terminal
Table of Contents

Advertisement

BHT-1200 Series
"LCD/Keypad" tab is used to change the LCD/Keypad brightness, power
save level and keypad backlight ON timing.
To change the settings, tap the LCD/Keypad tab in the Backlight menu.
LCD/Keypad tab - LCD Backlight
ON Level
Select the LCD brightness from the following four levels.
Off
Low Bright
Mid Bright
High Bright
Power Save Level
"Power save Level" is used to save battery power when the BHT is not in use for a period of time
specified in the General tab – "Specify the illumination time (sec)".
Select "Dim" or "Off".
Dim:
Dim (Backlight stays ON faintly.)
Off:
Backlight turns OFF.
LCD/Keypad tab - Keypad Backlight
Select when the keypad backlight is turned ON.
Key press or Screen tap:
Key press:
Disable:
BHTSettings
"BHTSettings" is used to access to the system properties of the BHT.
Double tap the "BHTSettings" icon in the Control Panel to open the
System Properties menu.
Refer to Chapter 4, 4.4.3 System Properties.
50
(Dark)
(Bright)
The backlight is turned ON when any key is pressed or the screen is tapped.
The backlight is turned ON when any key is pressed.
The backlight is turned Always ON.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents