Denso BHT-1260BWB-CE User Manual page 179

[4] MSI
The parameter screen shown on the right is displayed when "MSI" is
checked in the Read Code menu.
Code: Enables the code reading.
Specify the minimum and maximum numbers of digits to be
read, if the code is enabled.
The codes within the specified range are read.
Check Digit: Select the radio button "Single" or "Double".
"Single" uses a one-digit character for the check digit.
"Double" uses two-digit characters for the check digit.
[5] RSS (RSS-14, RSS Limited, RSS Expanded)
The parameter screen shown on the right is displayed when "RSS" is
checked in the Read Code menu.
Tap each tab, to set up the parameters for RSS-14, RSS Limited or RSS
Expanded.
Code: Enables the code reading.
Stacked: Enables the stacked code reading.
(Only for RSS-14 and RSS Expanded)
[6] EAN UCC Composite, PDF (PDF417, Micro PDF417), MAXI
The parameter screen shown on the right is displayed when "Composite" or
"MAXI" is checked in the Read Code menu.
Code: Enables the code reading.
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
167